alright, well.............
i showed him a 1" briggs shaft, and i showed him a 3/4" H60 shaft. i basically said this is what it used to look like, then i grinded it, trying to get it to this.. and i ended up with this. how do i get back to 3/4? he said well he thinks its cool that i tried, but he says he just worked on a harley shaft and it was a PITA to build up and get back down. especially because that one didnt fit in a lathe.... long story short, he said its a lesson learned for sure, i gotta know my limitations, i cant do anything with a grinder and a running engine. i broke the news to him that tecumseh has been out of business for a couple years..... so i cant just go buy a cheap part.
well, he estimated $250-300ish just to get it back to 3/4". NOOOOO! he said if i got him a 1" shaft, so he doesnt have to build it up with welds just machine down, he said its ALOT easier and he would be able to do it for around $100..... so i might just buy a 1" TC.
also he said its a real PITA to do, weld and let cool, weld and let cool, mark, machine, repeat.......................
well on the bright side, i was looking on CL, and i found an ad for a not running tecumseh 8hp for $25!!!!!!!!
^^^^^^and guess what, they are within a MILE OF MY HOUSE! so im just gonna go knock on their door and hope that they still got it!!!!!