Any thoughts????? I don't know enough to try to argue, lol, just asking???????
http://www.kartpartsdepot.com/product_p/001.htm
According to this article, stage 1 mods (jets, air filter, exhaust) done to a 6.5 HP 212cc Predator increased max torque to 14.10 ft*lb @ 2300 RPM (HF claims 8.1 ft*lb @ 2500) and close to 9 HP @ 3600 RPM (HF claims 6.5 HP @ 3600).
I can't see the units for torque on the screenshot...
might be a coincidence that the stock engine is producing 12Nm roughly, and that 14Nm seems to be a plausible result with no more than rejetting..
Anyways... cool if they managed to achieve 14 ft lbs if they did..
and if that's repeatable.. even better!
if you're burning belts on your go kart, and do not have a dyno handy to test the actual Torque at clutch engagement speed...
there are two possibilities:
1) you assume you have more torque than you actually have and gear higher, burn a belt (~$25) and regear (new sprocket, new chain... another 20 bucks)
2) you assume you have at least the stock torque, lose a mph on top speed and gear accordingly the first time.
In fact.. we were asked for an advice...
and as such the second option is the better advice

(it WILL WORK plus you don't lose money trying)
we also advise people to wear helmets;
(and we all know that every now and then we don't wear helmets ourselves.. but that's not good advice, is it?)
And with that;
Lawes knows what to do, and got an idea what could be done which may or may not work out for him.
in the end, it's his choice anyways
'sid