Here's the deal: I picked up an old non-running DR350S on Sunday and fixed it up a bit and got it running. It doesn't like to idle below 2500 RPM. Anywhere between 1500-2500 blipping the throttle is still very responsive with no hanging or dipping and returning when it comes back down, but the bike will seemingly randomly die like a killswitch has been hit within a short time frame. No problem restarting it after.
It's definitely "idling" with the throttle way too far open. It's on the pilot circuit. Carb's been cleaned and the idle mix screw definitely can flow, it just never comes into play because the bike dies first. Couldn't find any vacuum leaks with an unlit propane torch.
My next step is replacing the spark plug, but I'm waiting on a thin walled wrench to get here since none of my stuff fits it. In the meantime, I'm coming here to ask if there's anything else I should look into.
So -- any thoughts?
It's definitely "idling" with the throttle way too far open. It's on the pilot circuit. Carb's been cleaned and the idle mix screw definitely can flow, it just never comes into play because the bike dies first. Couldn't find any vacuum leaks with an unlit propane torch.
My next step is replacing the spark plug, but I'm waiting on a thin walled wrench to get here since none of my stuff fits it. In the meantime, I'm coming here to ask if there's anything else I should look into.
So -- any thoughts?