how can i find the size of my engine crankshaft
i have a 3hp Briggs and strat, i tried measuring it but it came out to a bit over 1/2 inch
so it wasnt accurate enough
well
if it looks like a bit over a half inch then its probebly 5/8
try measuring it starting at the 1 or 2'' line and see what it looks like because the little end on the tape measure slitly moves a bit
Not very accurate. But if it works for you, then it's fine.
I need accuracies around .005. Anything less accurate than that would cause pistons to seize.