Covid Kart

Speed Jr.

New member
Messages
6
Reaction score
0
Location
Bristol WI
Figured I would drop a thread on the kart I built over the last month since we were stuck at home. I call it the Covid Kart. Lol. Enjoy.

https://youtu.be/BjqGo28ABMo

Larry
 

Attachments

  • 20200516_140743.jpg
    20200516_140743.jpg
    950.5 KB · Views: 23
  • 20200523_151809.jpg
    20200523_151809.jpg
    339.5 KB · Views: 13
  • 20200516_171922.jpg
    20200516_171922.jpg
    794.6 KB · Views: 23

Speed Jr.

New member
Messages
6
Reaction score
0
Location
Bristol WI
Awesome kart!! What speed do you get out of it?

What batteries and controller are you using? Gearing?

Thank you.. So far its running around 55mph. Curtis 1236SE controller, ME1507 Motor. I'm running five 16V Antigravity VTX-20's. The controller has the motor speed limited to 4000rpm. I have a programmer on the way to turn it up. Running 40 pitch 20T on motor, 45T on axle.

https://youtu.be/BjqGo28ABMo
 

Functional Artist

Well-known member
Messages
4,410
Reaction score
1,691
Location
Toledo, Ohio
Nice kart :thumbsup:

Um...a 20T to a 45T is like 2.25:1 :huh:
…& in the pic (above) it looks like there's a 16T drive sprocket
…& the driven sprocket looks a bit bigger than 45T too
 

Speed Jr.

New member
Messages
6
Reaction score
0
Location
Bristol WI
Nice kart :thumbsup:

Um...a 20T to a 45T is like 2.25:1 :huh:
…& in the pic (above) it looks like there's a 16T drive sprocket
…& the driven sprocket looks a bit bigger than 45T too

Yes, in the photos I had a lower gearing. I have since change the gearing probably a dozen times. I event went to a 22T drive sprocket and 42T axle sprocket, but was a little tall. Right now the 18T/42T is the best all around setup. Enough torque to blow the tires out and still decent top end. After programming its running at 65mph with great acceleration.


Larry
 

Attachments

  • 20200606_112836.jpg
    20200606_112836.jpg
    495.6 KB · Views: 9

Bmr4Karts

Member
Messages
227
Reaction score
22
Yes, in the photos I had a lower gearing. I have since change the gearing probably a dozen times. I event went to a 22T drive sprocket and 42T axle sprocket, but was a little tall. Right now the 18T/42T is the best all around setup. Enough torque to blow the tires out and still decent top end. After programming its running at 65mph with great acceleration.


Larry

Your conversion is awesome.
 
Top