I have read the TC sticky and would like a clarification on the correct way to align the driver and driven pulleys.
My questions are regarding an asymmetrical Comet TC that takes a 203591 belt.
From the Comet tech sheet in the sticky, it looks like you align the 'flat' faces of the rear sheaves of the driver and driven pulley.
From the Stacey video embedded in the sticky, it looks like you align dead center of the driver and driven pulleys.
Which is correct? I assume that for an assymetrical belt, you would align the faces of the rear sheaves, as seems to be depicted in the Comet tech sheet.
Also, what is the tolerance for the center-to-center distance? Are the min-max dimensions absolute, or in practice can they be plus or minus some small distance? For example, if the lower spec is 6 7/8", is 6 3/4" a problem? (I realize that the spec is the spec; just wondering what the real-world acceptable tolerances are.)
My questions are regarding an asymmetrical Comet TC that takes a 203591 belt.
From the Comet tech sheet in the sticky, it looks like you align the 'flat' faces of the rear sheaves of the driver and driven pulley.
From the Stacey video embedded in the sticky, it looks like you align dead center of the driver and driven pulleys.
Which is correct? I assume that for an assymetrical belt, you would align the faces of the rear sheaves, as seems to be depicted in the Comet tech sheet.
Also, what is the tolerance for the center-to-center distance? Are the min-max dimensions absolute, or in practice can they be plus or minus some small distance? For example, if the lower spec is 6 7/8", is 6 3/4" a problem? (I realize that the spec is the spec; just wondering what the real-world acceptable tolerances are.)