Concession Go kart

Status
Not open for further replies.

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
Ive actually been emailing that guy for about 2 weeks and he told me that hed give it to me for 75. but i just emailed him and he says that someone else came up. if the other guy doesnt give him a deposit by this weekend hell let me know.

is that a good engine??
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
No where does it say it runs. And him saying "it ain't fast with out mixed gas" scares me that he ran that motor, a 2 stroke, with straight gas.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
so thats a no go on that engine then....:toetap05:

hey red sox, in the post that you made earlier you said that one of those 125 engines made about 9 hp and redlined at around 9000 rpms, but the one that i found said around 30hp and redlined at 11000 rpms. did i look for the wrong type of engine? could i possibly get a link to the right engine?

Thanks
 

newrider3

New member
Messages
1,674
Reaction score
5
Location
Colorado
And him saying "it ain't fast with out mixed gas" scares me that he ran that motor, a 2 stroke, with straight gas.

Umm, just sounds like a cute saying to me.


one of those 125 engines made about 9 hp and redlined at around 9000 rpms, but the one that i found said around 30hp and redlined at 11000 rpms. did i look for the wrong type of engine? could i possibly get a link to the right engine?

He was referring to 4-stroke pit bike engines, and you found a 2-stroke dirtbike engine.

http://cgi.ebay.com/ebaymotors/4-UP...rcycles_Parts_Accessories&hash=item20b8b3db6e
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
Yea. 110cc will work. Just look up the stock gearing for the bike and add a few teeth to the rear to help compensate for the additional weight. Who makes a 110cc? Am I safe to assume that a 110 would most likely be a pit bike?
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
I believe that's the whole pit bike vs race bike dilemma. And that guy probably has a race engine, but who knows.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
thanks for the pics bighead!

the guy with the 110cc hasnt replied yet but the guy with the snowmo has. he says that the pto turns over, and that both pistons move freely, it has spark and good compression and all the clutch components and drive setup is complete. he said 75 for it.

im thinking about trading him my old kart the one with the kohler engine that doesnt run and the 5 horse with the bent crank.

if he agrees will this be a good deal??
 

bighead

New member
Messages
4,022
Reaction score
54
Location
Pacific Northwest USA
thanks for the pics bighead!

the guy with the 110cc hasnt replied yet but the guy with the snowmo has. he says that the pto turns over, and that both pistons move freely, it has spark and good compression and all the clutch components and drive setup is complete. he said 75 for it.

im thinking about trading him my old kart the one with the kohler engine that doesnt run and the 5 horse with the bent crank.

if he agrees will this be a good deal??

You need the driven unit from the sled to make it work.

Just but a clone for it. Keep that tranny
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
Bighead, that one you posted looks to have some kind of J-arms. That's an interesting setup.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
a little pricey for me and on top of that i have to pay for shipping.

the guy who sold me tha kart told me that hed give me the 18 horse briggs for 80. would that be better than a sled engine, or the 125??

Thanks
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
I wasn't recommending that for you, only saying options exist cheaply. From best to worst, it would go, IMO, sled, 125, 18hp briggs.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
ok dont take this the wrong way, but why? im not trying to go above you or shoot down an ideas i just want to know why. like advantges and disadvantages of it all. just so i get a good understanding of why you placed different thing first second or third. im really new to "big" engines if you would call it that.
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
I said a sled was best because of it's dramatically larger displacement, CVT, and high RPMs. Second, I put the 125 because of it's manual gearbox, lower displacement, and high RPMs. Lastly, I put the Briggs 18HP because of it's lower power-weight ratio, governed RPMs, need of a CVT ($200-300), and, limited RPMs even once the governor is removed.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
so the polaris sled it is!!

how hard is it to get it running? he said that the pistons move freely, nothings seized up, the carbs are good, and its all complete with the wiring and everything. he says has good compression but he doesnt know about spark because its missing both plugs. he said that it ran before and that all the clutch pieces are good. since it was under covers and the engine has that body thing over it it hasnt really been exposed to elements after he got it. he says it needs new plugs and a tune up. I think it should be an easy fix but before i go buying anything i wanted to post here. so whadda ya think should i go for it?
 
Status
Not open for further replies.
Top