Davidgx200
New member
Hey guys got my motor partially assmebled back rain just won't hold off. here's the setup 6.5 clone (greyhound blue HF) ARC billet flywheel and billet rod 0.020" longer than stock honda flat top piston. 0.050" offset timing key approx. 8 degrees advance 91.5 main jet pilot jet drilled with #72 bit K&N filter and billet adapter custom header 18lbs. springs, no governor. What would be the best timing key for this setup, I hear 1 degree off can hurt performance.Recently my stock rod shattered so now I'm wondering what are the expected rpms on this setup. Looking at pvl coil w/rev limiter and was wondering what the max rpm I could limit the engine without any damage. Is it possible to buy the coil without buying the kit. If not anyone know of another cheap way to limit rpm at a safe level. Anyone can shed some knowledge on this that would be appreciated. Also wondering if anyone knows what the compression ratio would be with the 0.020 longer rod and flat top piston. Thanks guys