Comet Clutch Question

Status
Not open for further replies.

Mtnbkr738

New member
Messages
2
Reaction score
0
Hi all.
Noob here...so pls be patient.

My sons 5 hp kart has a comet clutch on it. It was working perfectly for a long time.

Now it seems that the DRIVEN flywheel (not the DRIVER flywheel) is kinda "stuck" in the "high speed/ closed" position. resulting in NO low end torque and burning up belts.

Correct me if im wrong...but seems that when starting out at low speed the Driven flywheel is "open" and the belt is moved toward the center giving you more torque. (correct?)

It doesn't look like the flywheel or spring is broken... but we only have "high speed" now.

QUESTION: any repair thoughts?? or just replace??

thanks!!
Dan
 

KartFab

Active member
Messages
3,381
Reaction score
60
Location
Dallas, TX
Wrong. Driven sheaves are close together when starting out , and become further apart at high speed .
 

Mtnbkr738

New member
Messages
2
Reaction score
0
Ok thx for the help.... So Why would we be burning up belts now and no low end torque anymore... Is the DRIVER sheave not doing its part??

The motor is running great...and this thing would drive through snow and up hills with no problem... Now you have to have the engine at full speed to make it up the driveway...so something changed and I don't know what.

Thx again!
 

Denny

Canned Monster
Messages
12,067
Reaction score
8,605
Location
Mayberry, Indiana
Pictures of both clutches would do a world of good here. Otherwise we're just guessing blind. The problem may actually be with the primary or a seriously worn belt.

Denny
 
Status
Not open for further replies.
Top