Comet 40 on a 6.5?

Status
Not open for further replies.

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
if the 40 series driven has a higher tension spring it may take more force to open.

I am yet to take physics, but my basic brain says RPM is RPM and the weights spinning at the same RPM don't care whether they are on a modded 6.5 or a Briggs 18hp V-twin. The weights weigh the same and the springs are the same strength regardless.
 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
oops, heh, i was thinking through the system backwards, :oops: yeah, no problems i can see.

as for physics, i haven't taken physics yet either, and i got quite a few years to go until i do.
 

metalthrashinman

New member
Messages
279
Reaction score
0
Location
Hope, NJ
I am yet to take physics, but my basic brain says RPM is RPM and the weights spinning at the same RPM don't care whether they are on a modded 6.5 or a Briggs 18hp V-twin. The weights weigh the same and the springs are the same strength regardless.

TRUE, but if the torque is not available from the engine, the rpms will slow. That is why gearing in this case is so important.
 

pinoyclass

New member
Messages
10
Reaction score
0
just a heads up I ended up ordering a new comet 40 driver from bmikarts.com. The driver is original comet and the lady told me the driven is comet specs made in usa by CPC.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
just a heads up I ended up ordering a new comet 40 driver from bmikarts.com. The driver is original comet and the lady told me the driven is comet specs made in usa by CPC.

Interesting- Did they give you an idea how much stock they have of the original Comet stuff?
 

pinoyclass

New member
Messages
10
Reaction score
0
I asked if it was original comet 40 series driver? She said one minute and looked it up in the computer and just said we have a few in stock still but the driven 40 series is cpc brand. I decided to order there instead from gokartsupply.com because the part # said it replaces the original part # implying that its not original comet.

Kind of off topic but hope this helps.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
That's okay. This thread and at least one other are morphing into info sources for CVT's, and I'm okay with that. With Comet gone, we all need whatever info we can lay hands on to keep our projects moving.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Your first link- I've seen that page before, I don't think it's particularly new. The second link- no idea if it's remotely current. BUT-

Do try, inquiring minds want to know!
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
I just shipped this off to CPC:

To whom it may concern,

I am E-mailing on behalf of a go karting forum to inquire about your production of Comet torque converters. With Comet out of business, we have been forced to look elsewhere, Max Torque, used Comet parts, or...China. We have uncovered a CVT company in Canada, but have minimal knowledge of their products. Would you mind sending me some information on CVT's currently in production, how to order, and pricing? If you are at all interested, we would like to welcome you to our forum, DIY Go Karts. www.diygokarts.com/vb/ Currently, there are a few companies present, GTC (the Chinese CVT producer) and SpiderCarts (a main source of go kart plans).

Thank you,
N***** M******* (redsox985) and DIY Go Karts forum
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
I just got this back from CPC!

Hi N*****,
My name is Jay Grafft and I’m heading up the Hoffco/Comet division of Certified Parts Corporation. Thanks for the inquiry! We have been busy for the last year bringing the Comet product line back into production. Items that we have manufactured and/or are currently manufacturing include 4” clutches, pulley clutches, 20/30 series drivers and drivens, 40 series drivens, TAV kits, 94C Dusters, Salsbury clutches and disc brakes/calipers. Next on the horizon are snow clutches and building up stock for future orders. So far, we have been playing “catch up” and just building to suit customer orders, if we have the components available. I have been refraining from being too active on the blogs and doing any advertising until we have the full product line to offer; however, it is our intention to bring Comet back to life and we wouldn’t have bought into this brand if we didn’t think they made a great American product. I welcome any input you have and will look into your forum.

Best regards,
Jay

James J. Grafft
Vice President - Hoffco/Comet Division
Certified Parts Corporation
1029 S. Jackson Street
Janesville, WI 53546
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
That does sound pretty good. I noticed the he mentioned the 40 driven, but not the driver... What's with that?
Anyway- lets all keep our fingers crossed!
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
The best part is that they "have been building to suit" so you CAN get Comet parts, they just need to be custom ordered through CPC.
 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
i think its a lot easier to make the drivens as they are very similar to all the other drivens, but the 40 drivers are different than the others.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Minor update on this- I was at Princess Auto the other day and picked up what's known as a Category 1/2 Top Link bushing. Supposed to be used in relation to a tractor's 3-pt hitch, it is a steel bushing, 3/4" ID, 1" OD, 2" long. The OD is really good, the ID is a wee bit big, might have to insert some thin shim stock between the PTO and bushing.

Anyway, my intention had been to cut a 1/4" wide slot through the bushing and fabricate a new key that would be 1/4" wide through the bushing and clutch, and 3/16" for the PTO. However, I finally had time today to rip the 40 driver off my kart, and it looks like the "key" is machined into the bore, not removable. The previous owner of the clutch inserted a plug in the end, drilled for the PTO retainer bolt. The purpose of the plug is to prevent the driver from sliding along the PTO toward the engine. I will have to drive that plug back out to verify the state of the key. If the key is permanently affixed to the driver's bore, I will have to alter my plans.
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
I think you are in the same boat I was. The driver has a permanent key? I turned a brass tube on a lathe to .75" ID and 1"OD. Then split length wise on a band saw and used a belt sander to make two semi circles. I put the driver face with the key over the PTO then would take off a light layer on the sander and test fit until they were snug. Once snug, the permanent key is about opposite of the key in the PTO.



Brown = PTO
Gray = TC Driver Sleeve
Green = TC Fixed Key
Red = 3/16" PTO Key
Blue = 2 Piece Lathed Spacer
Black (center) = Tapped PTO Hole
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
I did this and it worked fine. I got a 1" bar and got a machine shop to drill a 20mm hole for a 20mm clone shaft.
Edit: didn't realise I had already said pretty much the same thing earlier
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
That's exactly what I have running on my kart now and have no complaints. I think it's the easiest solution.
 
Status
Not open for further replies.
Top