jarcynvicnchris93
New member
- Messages
- 180
- Reaction score
- 1
Has anyone on here converted their pull start clone engines to electric start?? and if so how???
Any proof of this Oscar? Where's the kit's? And plus its been awhile since I heard of the GX200 clone being sold with electric start.
35 hp out of a animal? No way some of them only make 8 hp.
No such thing as overkill, get a small block chevy on it....but I think both of those are probably really overkill in an offroad kart. thoughts anyone???
Yeah but if it's sold as a animal people immediatly say "Ohh 8 hp ok" But yeah then you might as well just get a 6.5 clone and mod it all the way up. Why pay $400 for 8 hp to start with when you can pay $100 for 6.5. And if your looking at quality over price both Briggs animal and Clones have been known to blow apart equaly.
Speed is determined by gearing not HP, HP is how fast yo can get to desired speed, A 5hp and a 10hp making the same RPM with the same gearing and same weight kart would make the same top speed, the 10 would get there quicker and could be upreared to go faster with reasonable acceleration.
Kinda like comparing a geo metro to a mid size 4 banger 4 door(say for example, a 1992 Toyota Camry with a 2.2 liter I4), both will go 80+mph but the metro needs a few miles to get there.
there are some modified animals out there that produce fairly close to this.. and yes in a way your right. They start out as 8hp motors, but to become an animal with all the factory mods really changes the makeup of the motor.![]()