chainsaw won't run

Status
Not open for further replies.

Thedude

New member
Messages
102
Reaction score
0
Location
Washington State
Hey what would cause a chainsaw to only run when primed through the carb. It does seem to be taking fuel from the tank so mabye a clogged carb or fuel line?
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
have you opened the carb yet?

you know it may not be that. just by it "not starting" you will never know what is wrong until you diagnose the problem, as long as you know what to check and how to put it back together.

just by it not starting... it could be

clogged exhaust port
bad gasket/air leak
old fuel lines
carb problems
 

DustinWolfe

New member
Messages
204
Reaction score
0
Location
Meridian, Idaho
chainsaws typically are really sensitive to jet adjustments and altitude changes too. your probably right but keep in mind it may just need a good tune.
 
Status
Not open for further replies.
Top