chain and throttle hookup!

Status
Not open for further replies.

zachpowell

New member
Messages
3
Reaction score
0
Location
Wichita kansas
My chain seems to be a little bit too long. i think i figured out how to fix that, but my major problem is idk how to hook up the throttle cable as this is my first go kart! below is a picture of the throttle control.


thanks, Zach
 

Attachments

  • 111223_001.jpg
    111223_001.jpg
    65.3 KB · Views: 21
  • 111223_002.jpg
    111223_002.jpg
    77.4 KB · Views: 19

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Regardless of engine type, throttle connection fundamentals remain the same. The idea is to attach a cable to the existing throttle arm, and fasten the cable casing to a stable location 2-3" away. Same is true for the pedal. There's dozens of ways to do this, even on the cheap. Many people including myself use bicycle brake cable. Have a look thru this FAQ, there are several good ideas here you can draw from.- http://www.diygokarts.com/vb/showthread.php?p=178688#post178688

Before you button things up and call it done, make sure 1) With the pedal at rest, the throttle arm is in the idle position 2) With the pedal all the way down, the throttle arm as at full throttle, 3)Everything moves smoothly 4)You have a return spring on the throttle arm AND on the pedal to pull everything back to idle when you get off the pedal.
 

stargazer7467

New member
Messages
34
Reaction score
0
you have a honda engine like i do, i hooked mine to the governer arm via the stick throttle setup and retained the governer srping.
 

supermanotorious

Winchmaster 5000
Messages
2,088
Reaction score
103
Location
New River, AZ
toystory you must be a college professor lol, well zach I usually get away on the cheap, if I need a "wire nut" and I don't have any from other projects, I will drill a hole thru a bolt and then clinch the wire between 2 nuts on the bolt, I think the bigger challenge is getting the right tension on the return to idle springs, I have a few on hand and try different combinations and mounting points till I get it right, here's a pic of my latest connection, if you notice a small wire that hooks the base of the lever and then disappears under the gas tank, that's my return to idle spring which is simply anchored to one of the flywheel cover bolts
 

stargazer7467

New member
Messages
34
Reaction score
0
here the way i have mine on the mini bike.:cheers2:
 

Attachments

  • gc160 (1).jpg
    gc160 (1).jpg
    77.1 KB · Views: 16
  • gc160 (2).jpg
    gc160 (2).jpg
    66.7 KB · Views: 9

porsche930dude

New member
Messages
906
Reaction score
29
Location
Upstate, NY
heres mine. i made the Z bracket to drop down under the filter it bolts on with the one valve cover bolt. then i clamped the cable to a rod that goes to the throttle hole. Hopefully you get the idea with my pics. its a tight squeeze in there.




 

porsche930dude

New member
Messages
906
Reaction score
29
Location
Upstate, NY
sure i know for me hooking up cables is the most agrivating thing about building gokarts and minibikes. I just try not to get pissed off take my time and think about it. Do a good job so ya only gotta do it once
 
Status
Not open for further replies.
Top