toystory you must be a college professor lol, well zach I usually get away on the cheap, if I need a "wire nut" and I don't have any from other projects, I will drill a hole thru a bolt and then clinch the wire between 2 nuts on the bolt, I think the bigger challenge is getting the right tension on the return to idle springs, I have a few on hand and try different combinations and mounting points till I get it right, here's a pic of my latest connection, if you notice a small wire that hooks the base of the lever and then disappears under the gas tank, that's my return to idle spring which is simply anchored to one of the flywheel cover bolts