oh. I thought that a 2-stroke of the same size would need 2x the air flow of a 4 stroke because it intakes twice as often as a 4-stroke at the same rpm?
I would've thought the same thing. Unfortunately, my carb theory is weaker than it should be. Still learning.
What I DO know- CFM=CIDxRPM/3456. From thecarburetorshop.com:
"The constant 3456 is more easily understood, and much more easily remembered if it is re-written (12 x 12 x 12 x 2). Note that the dimensions on the left side of the equation are in cubic FEET, and the dimensions on the right side of the equation are in cubic INCHES. As there are 12 inches in a foot, and we must then multiply 12 by 12 by 12 to keep the dimensions the same. The “2” is required because of the 4-stroke engine only drawing air on ever other revolution of the engine. The equation assumes 100 percent volumetric efficiency of the engine (more on this later)."
Having read the above, I would
assume the 3456 should be 1728 for a two-stroke, because of the multiplier "2." I would think that you'd drop the "2" when calculating for a two-stroke because it intakes on every rotation.
While this doesn't
really answer your question, it might help if you can find an equivalent for 4-stroke and recalculate.