I usually cut like so and it falls right off. Okay thanks that's easy enough.
CaptCanadia New member Messages 792 Reaction score 1 Location Acton, CA USA Oct 22, 2011 #21 devino246 said: I usually cut like so and it falls right off. Click to expand... Okay thanks that's easy enough.
devino246 said: I usually cut like so and it falls right off. Click to expand... Okay thanks that's easy enough.
Doc Sprocket ********* Messages 15,677 Reaction score 153 Location Ontario, Canada Oct 22, 2011 #22 No boom. Flames, maybe...
devino246 Official DIYGK Chem Nerd Messages 3,856 Reaction score 17 Location Lynchburg, VA Oct 22, 2011 #23 CaptCanadia said: Also, the sparks will obviously be close to the engine, it won't cause it to go boom right? Click to expand... Not unless you fill the tank before you cut and have a habit of spilling gas everywhere.
CaptCanadia said: Also, the sparks will obviously be close to the engine, it won't cause it to go boom right? Click to expand... Not unless you fill the tank before you cut and have a habit of spilling gas everywhere.
CaptCanadia New member Messages 792 Reaction score 1 Location Acton, CA USA Oct 22, 2011 #24 Tank is close to empty and I never spill. I might just go drive it til' runs out so I wont go boom.
fowler New member Messages 5,463 Reaction score 18 Location Bullsbrook West Aus Oct 22, 2011 #25 or just duct tape the breather if the bolt is 3/8 or below u can just cold chiseil it off