building my first kart

Status
Not open for further replies.

wheels4mykids

New member
Messages
2
Reaction score
0
i was givin a frame and a motor. but i am having problems finding the other parts i need. and to be honest i am not sure what all i do need. i know i need wheels and a clutch but have no idea what kind of clutch to get. someone please a dad a hand. i am just trying to get it set up for my daughter(7) and then my son (1) when he gets bigger. thanks
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Okay- we could use some specifications, and some pics. Put up what you have, and we'll figure out the rest. Much of it depends on size and weight of the kart, expected performance, engine size, tire size, and intended terrain. Fix us up with some info, and we'll surely fix you up.
 

landuse

Moderator
Staff member
Messages
18,804
Reaction score
613
Location
Pietermaritzburg, South Africa
Thats a nice looking kart that you have there. It looks like you have a 1970's Briggs 3HP motor on there if I am not mistaken. They run very well, but you just have to make sure that the diaphram on the carb is not too old. If it is, it runs real crappy.

It looks like you are going to need 4 tyres, one being your drive wheel with a sprocket attached. You will also need a centrifugal clutch and chain.

It also looks as if you have scrub brakes. This means that you have a piece of metal that pushes down on the tyre when you press the brake. The friction between the metal and tyre stops the kart. These are not the best type of brakes to use as they don't have the best stopping power. They also don't work too well in wet conditions and your tyre wears down faster than normal. They will be adequite though if you don't want to change to something else. One thing to remember with scrum brakes is that your tyre diameter cant be too big otherwise it will not fit under the scrub brake (I hope you understand what I mean).

You could probably get by with a 10 tooth clutch, and 60 tooth wheel sprocket. It depends on the diameter of your rear tyre though. A 60 tooth might have a larger diameter that what you are looking at in tyres.

Have a look at THIS link for parts dealers. You will get some idea of prices.

Wait for some of the other guys here to give you some more info as well
 

chachaman811

New member
Messages
12
Reaction score
0
i was givin a frame and a motor. but i am having problems finding the other parts i need. and to be honest i am not sure what all i do need. i know i need wheels and a clutch but have no idea what kind of clutch to get. someone please a dad a hand. i am just trying to get it set up for my daughter(7) and then my son (1) when he gets bigger. thanks


I saw that engine that u have, it doesnt look like its running too well, but have a 3 hp engine that has been working great for me, ever since i bought some new parts {head gasket, jet screw, new diaphram, new fule straw thingy, cleaned out gas tank, new exaust and carb gasket, and i cleaned the valve's whith dental picks {grandad is a dentist} ] any way i would be more than happy to sell it too you with the clutch already on, all u would have to do is mount it and buy a drive sproket and put that on ur tire, then slap a chain on and hit the gas, if not i can just sell u the clutch,
:bannana:



by the way i have the same engine, if not newer
 
Status
Not open for further replies.
Top