5hpbriggs
New member
Hey guys,
I am new here and I thought I just wanted to ask some questions on how to build a mini bike.
First I thought i would use some 1 inch square tubing being that round tubing can be a P.I.T.A to work with. Then Here are some muesurments I came up with.
24 inches from bottom of frame to bottom of seat
8 1/2 inches wide
3 foot lond (frame)
Forks: 32 inches long
Picture below:
(clickable thumbnail)
Also I have a 1 inch axle and a set of bearing hangers and bearings.
I was going to use a hydro brake set up by foot pedal being I am might be using a race engine for this thing
What do you guys think?
Thanks
I am new here and I thought I just wanted to ask some questions on how to build a mini bike.
First I thought i would use some 1 inch square tubing being that round tubing can be a P.I.T.A to work with. Then Here are some muesurments I came up with.
24 inches from bottom of frame to bottom of seat
8 1/2 inches wide
3 foot lond (frame)
Forks: 32 inches long
Picture below:
(clickable thumbnail)
Also I have a 1 inch axle and a set of bearing hangers and bearings.
I was going to use a hydro brake set up by foot pedal being I am might be using a race engine for this thing
What do you guys think?
Thanks