hello i am from virginia. i recently purchased a mig/flux welder and i plan on building a kart. i would like to use a 125cc 2 stroke if i can find one for a reasonable price. if not ill probably find a b&s or honda 4 stroke. but to get started i want to build the frame myself. i have found one set of complete plans. just seeing if there is anything else out there for a road racing type kart using a 2 stroke, live axle and i would like to use cable disc brakes if that is possible.
building a kart frame
- Thread starter NB1015
- Start date
- Status
DS13
Annoying the Neighbors!!!
look at my thread in my signature because you will have the exact same setup as me
but if you decide to run a 125 2 stroke you will need hydraulic brakes.
OzFab
Well-known member
You're new here so, just a heads up, multiple threads on the same subject are a no no; chances are they'll be merged before too long 
yea im sure ill hear about it sooner or later. whats the best way to setup the front steering and angles. i really just need to buy a built frame, as much as i want to build my own frame it just seems to much for me at this point. limited space and funds.
Soapbox kid
New member
Craigslist is a Friend of a friend...My friend
DS13
Annoying the Neighbors!!!
if you've decided to not build your own, buy a frame that is sorta common so you can find parts easily and have more help building.
yes it is but they are getting hard to find!
Doc Sprocket
*********
Depends where you are. Where are you?
- Status