Anyone know where i can find a 1 inch clutch for a 13 hp clone?

[bajagokart]

anyone know of or even heard of a 1 inch clutch that handles 13 hp? preferably i would like it to be a 10T with #40/41 chain

 

[1992suburban]

northern tool... has them 13hp will be fine as long as you have the right ratio and tire size

 

[bajagokart]

is it a 1inch? i saw the had Hillard 3/4 inch bores which im using right now on my 6.5 hp clone but i never saw 1 inch

 

[mike75925]

comet, max torque both carried 1" bore clutches. they also sell tav's with a 1" bore driver. the kits are 169 on avg. the big clutch you need is around 80 last time i saw them

 

[lemegacool]

http://www.heeters.com/kartclutches.shtml
" mini cup clutch " they are real nice!

 

[anderkart]

Here's a cheapy 1" / 10-tooth rated up to 8hp: http://cgi.ebay.com/ebaymotors/ws/e...0ffe90f5b&rvr_id=&ua=WXI6&itemid=350260260932

lemegacool's link has a couple 1"/10-tooth/#41 models but that Noram Enforcer would probably hold up and work the best of all your centrifugal clutch options.

 

[bajagokart]

so do i ignore clutch hp ratings or listen to them? cause i can get those 8 hp rated clutchs from my local princess auto

 

[Kaptain Krunch]

Get a torque converter, if the kart in your avatar is the one your shopping for, a centrifugal clutch is not up to the job.

I believe newrider is selling a 40 series torque converter set up pretty cheap.

 

[bajagokart]

that is the go kart im shopping for but i just think im not really gunna do too much offroading with it i just want a toy to have a bit of fun with so i thought a clutch set up would be alot nicer and easier

 

[1992suburban]

gear it for 35mph you will be fine.. ( thats 35mph with NO governor)

 

[bajagokart]

so are you saying like a 7.2:1 or a 6:1 ratio?

 

[1992suburban]

use the calc tool.. input your variables Tire size ect figure it out that way

 

[Kaptain Krunch]

Im sure the ratio will be lower than 6:1, im not saying a clutch wont work, im just saying a torque converter will be worth it.

 

[bajagokart]

so do i ignore hp ratings on 1 inch clutches or do i listen to them?

 

[andrew]

hi if you want a totaly bad *** clutch for your 13hp,look up the Noram Enforcer clutch.i ordered it for my 16hp and it works like a charm.as you were saying this clutch has a 1inch bore, 1/4inch keyway,and up to 40hp!!!!!!!!!!! the only thing that i was disapointed about is that this clutch mounts on the end of the shaft but in my case thats okay ......hope this helps

 

[That One Guy]

Azusa has them for 124 bucks. Thats what I'm buyin

 

[The Product]

newmarket princess auto has 1 left lmao ita 1 inch bore with a ten tooth 41 chain sprocket

 

[kart mania]

newmarket princess auto has 1 left lmao ita 1 inch bore with a ten tooth 41 chain sprocket

i live in kitchener ill prob go pick it up!

 

[redsox985]

Please, check the date when the last post was made before posting, and consequently bumping a thread. The clutch was available on Jan. 22, 2010. Good luck getting it. If you must search to find a thread, don't post to anything older than about a month unless you contribute some important info. Otherwise welcome, throw a thread into the new members area and brief us on your kart.

 

[Clone 9.0]

Clutch located

I'm looking for a 12T 35CH 1" bore clutch my self,

Here's a 10T 40CH clutch I came across.


http://www.mfgsupply.com/m/c/206170A.html?mv_pc=Froogle