Any idea what the replacement comet part would be?

C

Craig.andrews1818

New member
Messages
26
Reaction score
1
does anyone know what comet torque converter would replace the attached in the picture? I was debating taking off and cleaning vs. replacing with new. Any suggestions would be great. This Kart sat for over a year so just trying to get it tuned back up.
 

Attachments

  • IMG_3127.jpeg
    IMG_3127.jpeg
    3.8 MB · Views: 8
  • IMG_3129.jpeg
    IMG_3129.jpeg
    2.1 MB · Views: 8
  • IMG_3130.jpeg
    IMG_3130.jpeg
    1.8 MB · Views: 8
D

Denny

Canned Monster
Messages
11,610
Reaction score
8,043
Location
Mayberry, Indiana
Take it off and clean and lube with dry graphite. It looks darn near perfect. GoKart Supply, BMI, MFG Supply, OMB Warehouse or any one of dozens of other parts places can get what you need.
 
P

panchothedog

Well-known member
Messages
2,788
Reaction score
3,739
Lots of videos on how to service a 30 series torque converter ( what you have ).
Use scotch bright or fine sandpaper to remove any rust. Clean with brake parts cleaner and lube with a dry product only, if at all. No oil of any kind. You'll need at least a decent pair of snap ring plires for the driven clutch. It doesn't look like there is anything wrong with your unit. Probably won't have to buy anything.
 
C

Craig.andrews1818

New member
Messages
26
Reaction score
1
Thank you guys. I will send a picture once I remove everything to see if the belt looks okay to you. I am getting some slippage when I go to accelerate from a stop. Hopefully the cleaning fixes this issue.

what do you recommend for chain oil?
 
C

Craig.andrews1818

New member
Messages
26
Reaction score
1
Hey Guys - I have attached a few pictures of my kart here. Specifically the governor arm. It seems like this engine is really held back from what it should be able to do. Doesn’t accelerate like it should and takes a while to get the speed up. It seems the engine may not be running at full capacity. Any ideas for the Kart? Maybe I am expecting too much out of this engine? Pictures attached.
 

Attachments

  • IMG_3448.jpeg
    5.1 MB · Views: 3
  • IMG_3447.jpeg
    5.1 MB · Views: 3
  • IMG_3446.jpeg
    IMG_3446.jpeg
    2.2 MB · Views: 6
  • IMG_3445.jpeg
    IMG_3445.jpeg
    1.8 MB · Views: 6
G.W

G.W

Well-known member
Messages
764
Reaction score
497
Location
Nyssa Oregon
Craig.andrews1818 said:
Hey Guys - I have attached a few pictures of my kart here. Specifically the governor arm. It seems like this engine is really held back from what it should be able to do. Doesn’t accelerate like it should and takes a while to get the speed up. It seems the engine may not be running at full capacity. Any ideas for the Kart? Maybe I am expecting too much out of this engine? Pictures attached.
Click to expand...
If you aren't apposed to a new engine you'd be a lot happier with it rather than trying to get that one going properly.
 
You must log in or register to reply here.
Top