Poboy kartman
Senior Moments Member
Cheese?
Yep....but you have to put it in your socks overnight to boost the octane level.
Cheese?
How resourceful! The dairy industry will be pleased with this re-purposing of their products.
cam timing?
Exhaust valve should be closing when the intake valve starts to open. When that happens piston should be close to TDC.
Also may be a problem with the compression release on the exhaust lobe.
cam timing?
Exhaust valve should be closing when the intake valve starts to open. When that happens piston should be close to TDC.
Also may be a problem with the compression release on the exhaust lobe.
cam timing?
Exhaust valve should be closing when the intake valve starts to open. When that happens piston should be close to TDC.
Also may be a problem with the compression release on the exhaust lobe.
AWWW CRAP! !!! Totally forgot about the compression release..(which makes it easier to crank the engine over with the pull cord when starting! !!!!)
Back to square one!!!! (Forget compression for now, or Google up how to disable the compression release! !!!)
Compression release.
Cool....Kinda weird in a way....but we got there....(y'all don't know about our PMs)....



Every time I checked, the bowl was full. If I flood the carb (because it doesn't start), is it normal for gas to leak out?
---------- Post added at 04:11 PM ---------- Previous post was at 04:10 PM ----------
Should I check the bowl right after it dies?
Was it good for you too?
Best 10 seconds of my life since Prom!
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
Seriously,
Thanks to everyone who helped me get to this point. Couldn't of even got here without all of your help. Much appreciated.
---------- Post added at 04:21 PM ---------- Previous post was at 04:16 PM ----------
The 1/4" fuel injector line that cost me $4 a ft doesn't fit great on the carb or gas tank. It fits the fuel pump well. I tried little hose clamps but doesn't seem to be doing the trick.