Advanced Hemi 212cc Predator Build

Status
Not open for further replies.

Desertduler

Active member
Messages
1,736
Reaction score
14
I did not read before that you did not have the side cover on, install it and recheck the deck height.
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
I did not read before that you did not have the side cover on, install it and recheck the deck height.

I did. It was much more uniform. Calling it 0.004", but still don't have a "Feel" for these gauges. lol, It might be 0.0035" - 0.0045".
I was hoping for closer, but much better than the 0.022" I measured before!!!!

Thanks for all the help!!!!

---------- Post added at 05:50 PM ---------- Previous post was at 05:06 PM ----------

First attempt at lapping the intake valve was instructional, but I'm not yet happy with the job.
Going to be late for date night if I keep at it.

Again, thanks!
Bob
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Hotter than my cam. lol
First date in like three months. Somethings can get me out of the garage.

Now back to lapping valves. It's nice being able to hear the sound change when lapping manually, but I may try a drill today. Not much time before work
 

Attachments

  • date night.jpg
    date night.jpg
    360 KB · Views: 11

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
This was a first date. Have avoided marriage up to now (nobody loves me! lol). I've had two 8 year relationships (one ended pretty recently), but no rings and no kids. That (along with working 7 shifts a week) is how I can afford my new hobby.

I forgot how expensive dates are...
 

Jrgunn5150

Rudderless
Messages
1,028
Reaction score
12
This was a first date. Have avoided marriage up to now (nobody loves me! lol). I've had two 8 year relationships (one ended pretty recently), but no rings and no kids. That (along with working 7 shifts a week) is how I can afford my new hobby.

I forgot how expensive dates are...

I have a friend who just pays for the end part of dates as a cheaper alternative lmao.
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
BTW, YOU ALL may be witnessing "MY" midlife crisis... lol
Thanks for the DIY therapy!!!

Back up the beanstalk I go!

---------- Post added at 05:18 PM ---------- Previous post was at 05:17 PM ----------

I have a friend who just pays for the end part of dates as a cheaper alternative lmao.

I was thinking the same thing for real!
But she's real nice, I like her. We used to work together.
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
and since it not your Wife. I'll just say it.

DUDE SHE'S HOT. no Seriously real pretty Girl. Good luck.
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
The drill and tube didn't work and I didn't want to mess with it so back to the suction cup
 

Attachments

  • image.jpg
    image.jpg
    257.3 KB · Views: 3

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Son

.that's ILLEGAL!


I see what you did there. I had to go back and see what I wrote. lol

---------- Post added at 11:53 PM ---------- Previous post was at 11:49 PM ----------

While I am rethinking my spring compressor and plotting revenge on who ever came up with this retainer / keeper system....

I may also cut every other fin off the plastic flywheel fan. Get some more use out of the die grinder....

Thoughts????
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
Thoughts,,,, Well I have heard of doing that. But I always wondered this:
If you are not totally precise... Cant that unbalance things?
I mean it is attached to the crank.
Are these engines balanced?
Would it even matter?
I know on a small block V8 Chevy, they "balance" everything.
Is that just due to the V and opposing multiple cyclinders?
 

landuse

Moderator
Staff member
Messages
18,804
Reaction score
613
Location
Pietermaritzburg, South Africa
Me too, You may know him he lives in White Settlement TX.:surrender:

LMAO

I see what you did there. I had to go back and see what I wrote. lol

---------- Post added at 11:53 PM ---------- Previous post was at 11:49 PM ----------

While I am rethinking my spring compressor and plotting revenge on who ever came up with this retainer / keeper system....

I may also cut every other fin off the plastic flywheel fan. Get some more use out of the die grinder....

Thoughts????

Cutting fins off doesn't really help out that much. You also stand the risk of having an unbalanced flywheel
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
I think it's in. Tools used 13mm box wrench and pencil with tip broken off.
 

Attachments

  • image.jpg
    image.jpg
    273.1 KB · Views: 3
Status
Not open for further replies.
Top