A Complete Disaster. More like 6 HP Explosion

Status
Not open for further replies.

B man

Tecumseh FTW!
Messages
2,490
Reaction score
3
Location
Oliver springs,Tn
Teaches me to rev-proof your engine (someone should come up with a catchy one liner instead of "rev proof") before you remove the governor. Hopefully people see this and don't remove their governor unless they know what they're doing, first.

Still don't know where to find an engine around 11-15 HP engine. Any help?

Harbor freight?
 

tetanus

New member
Messages
15
Reaction score
1
Location
NC
I'm actually surprised you didn't blow the flywheel first, I've had a few clone motors where the flywheel came apart. Usually the magnet would disintegrate and take out anything in its way. So again well done!
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
Teaches me to rev-proof your engine (someone should come up with a catchy one liner instead of "rev proof") before you remove the governor. Hopefully people see this and don't remove their governor unless they know what they're doing, first.

Still don't know where to find an engine around 11-15 HP engine. Any help?

For a new one, Harbor Freight...for a used one, look for not only engine, but roto-tillers etc in your local Craigslist, classified ads, farm/ranch/estate sales, commercial/industrial equipment auctions, etc. Kinda like giving away kittens, you need to ask everybody you meet because you never know who might have just what you're looking for.

Used ATV's seem to be a good source as well, plus they've got transmissions.
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
... (someone should come up with a catchy one liner instead of "rev proof") ...

I don't know about a catchy phrase for "rev-proof", but I've got a nomination for a new verb that essentially means "what happens when you don't rev-proof your engine"...


Ready? "Brandonize", as in: "Man, I really Brandonized my engine, just look at the parts laying all over the yard!"
:wai::cheers2::roflol:

You'll be famous!!! :D
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
I don't know about a catchy phrase for "rev-proof", but I've got a nomination for a new verb that essentially means "what happens when you don't rev-proof your engine"...


Ready? "Brandonize", as in: "Man, I really Brandonized my engine, just look at the parts laying all over the yard!"
:wai::cheers2::roflol:

You'll be famous!!! :D

Dangit, that's funny right there- I don't care who you are!!!:roflol:
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
They MIGHT have used it in "Cars". It's a quote from Larry The Cable Guy, the comedian that voices "Mater" the tow truck in the Cars movies.
 

Brandon1023

needs an oil change
Messages
422
Reaction score
4
Location
Miami, Florida, Dade County 305
Haha I like Brandonize. Ill search for some agricultural equipment, too. In recent news: I put my little brother's Gx200 on my Kart and it was working wonders. I felt like I had more torque (I would know, b/c I've been using a dead axe since I was 10) as if I could ride through grass better etc. That is until I let my little brothr and a dumb friend ride it last night. Now it has difficulty moving even 1 person. The engine still revs (no muffler.. we all know how that is.) But last night we had to push it while giving t gas. The revs kinda sputter, however. Maybe its a carb problem since its not a huge fan of starting w/o choke. But I did just clean it a month ago. When I go to the garage, ill fiddle with it some more.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
the gx200 engines usually always need choke even if its a little hot.

id build some kind of pipe to start
 
Status
Not open for further replies.
Top