bullet15963
New member
- Messages
- 2
- Reaction score
- 0
hey guys, I have an old 5hp Briggs and stratton that suddenly wont start, this engine did work fine when I got it, took it apart anyways... The gas tank has a nice layer of rust on the inside, I managed to sandblast most of it away. The carb was quite clean already, so I cleaned it. I replaced the spark plug with a new e3 plug. After its all back together, i just cant get it to start. When i pull it, full choke, all that happens is some white smoke and sometimes sparks come out the air intake (probably not good.) Some times white smoke will come out between the head and block, so the only thing i can think of is to get a new header gasket because I'm not getting any compression. Any thoughts?