420cc engine for cheap..........

Status
Not open for further replies.

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
I haven't heard people messing with the E-tube on the 390 -420.
Something I'd like to play with.

On the 212, people use the gx160 E-tube.
Not sure what people might try on a 420cc
 

aham2003

Member
Messages
219
Reaction score
1
Location
Cleveland, Tn
So the stock e-tube can handle the increased fuel flow? Interesting. Id like to see someone play with that as well. Until then, stock it is.
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
I dont usually like starting new forums unless its useful. And over there is public so its easier to google it. haha

Google brings me to DIYGK very often. That is why I joined here!

Your secrets may not be safe here either. :roflol:
 

Joe-405

Enjoying New Projects
Messages
2,673
Reaction score
98
Location
U.S.A.
Stock e tube is still in mine and it runs good.

The specs from arc were .024" idle and .040 main but I can tell you mine was rich. So go smaller ! It ran great but the plug was black.

I got #1-#80 drill bits and that's all you need. #1-60 from harbor freight and #61-80 from my local hobby store. Both sets were $35 for both. $20 harbor freight and $15 hobby store.
 
Status
Not open for further replies.
Top