I have no issues hacking and rewiring I am actually pretty good at doing that , I just would like to keep the original switches in the dash if possible so was hoping to just find the plugs thinking it would be the easiest , never thought that finding a simple plug would be so hard , just thought I may have not been looking in the right places, but I have done alot of searching and still no luck , was hoping someone else out there had better luck then me finding, or just knowing where to go to get one, I could not imagine that a Chinese go cart would make their own plugs for their harnesses ,
You can keep the original everything with a banked wago.... Cut off the three wire plug splice and pop the wires into a 3 bank wago.
oh gotcha i know what you mean now , and yes that would work fine but the plugs I have been looking for are the ones that goint to back of the switches ,, anything other then that i just use heat shrink butt splices or connectors , I have never used wagos but they look convent to use , but i am still lacking the understanding of what plugs go where to make them work , i have some time tonight when i get home from work to sit down with pen and paper and trace out all the wires to find find what goes where and what does what so I know where to plug the stuff into even . thanks for your help any and all input is apricated
Thats a badge of honor! Wear it proudly!
www.vmcchineseparts.com