#25 drive chain(clueless)

[khariag]

will a #25 drive chain fit my 12t/60t sprockets.my chain popped .i looked up "go kart chains" but they are all like 3 feet -5 feet long and the chain on my kart is about 1 foot or a foot and a half.i think it has like 69 links.i only see pocket bikes and things like that for #25 drive chains tho.te sprocket on my cluth has 12 teeth and the sprocket on the back has 60 teeth.what type of chain do i need??

 

[EagleTalons]

What is the pitch of the sprocket? (Distance between teeth)

 

[Kaptain Krunch]

you do know you can cut chains right? just get it a little longer than you need and cut it to size.

 

[khariag]

good idea kapm.they dont make the longer chains also thicker and wider?

 

[Kaptain Krunch]

Well if they dont make the size you need you could get 2 small ones and an extra master link and connect them together.

 

[oscaryu1]

#25 is tiny. Won't fit a 35 or 41... then again, they're different. NEVER will. Lol.

Yes, you can get a chainbreaker, or you can use the boltcutter/grinder method.

 

[jr dragster T]

#25 pitch or 8 mm. Commonly found on pocket bikes, Mini ATV's ETC.

 

[khariag]

i went to northen equipment and got it.it was actually #35

 

[fastkart1]

i have seen #35 chain it's smal
#25 would be like bike chain

 

[r_chez_08]

^why did you bump this 3 year old thread with useless info.
#35 is used on karts and is 3/8" pitch.
#25 is used on some pocket bikes etc and is 1/4" pitch (2/8")
Push bikes usually use 1/2" chain, however it is far narrower than the #40/41/420/425 chains we use for karting purposes.
Minibikes often use #35 chain.