224 motor. Generator 5000 w. Dual fuel.

[eddybuilt]

Valve spring keepers are bad. Harbor freight don't sell them. Can't seem to locate anything Upc193175490544. Non hemi, thanks.

 

[Sparkwizard]

Do you have a picture of what you need? Valve keeper failure is a truelly rare thing.

 

[Sparkwizard]

https://www.ebay.com/itm/158065788136?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1U4S9o0zZRnSBgS2Ez2DdbA25&norover=1&mkevt=1&mkrid=711-173151-913341-5&mkcid=2&mkscid=101&itemid=158065788136&targetid=2449372253943&device=c&mktype=pla&googleloc=9010174&poi=&campaignid=24187699436&mkgroupid=197989403005&rlsatarget=pla-2449372253943&abcId=10813835&merchantid=101500315&gad_source=1&gad_campaignid=24187699436&gbraid=0AAAAAD_QDh8IotjKen9i5vfM2yU0aeF3H&gclid=Cj0KCQjw2t3VBhD8ARIsAK0F6qz3y4VuoiIii9WZ0lrfw4oWS77Wlzv7QfoBQ2ivsFFvLPeqQwPogqUaAol-EALw_wcB

If this is what you need, there are some on eBay.

 

[panchothedog]

Do you have a picture of what you need? Valve keeper failure is a truelly rare thing.

Failure a rare thing. Losing them, not so much.

 

[eddybuilt]

https://www.ebay.com/itm/158065788136?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1U4S9o0zZRnSBgS2Ez2DdbA25&norover=1&mkevt=1&mkrid=711-173151-913341-5&mkcid=2&mkscid=101&itemid=158065788136&targetid=2449372253943&device=c&mktype=pla&googleloc=9010174&poi=&campaignid=24187699436&mkgroupid=197989403005&rlsatarget=pla-2449372253943&abcId=10813835&merchantid=101500315&gad_source=1&gad_campaignid=24187699436&gbraid=0AAAAAD_QDh8IotjKen9i5vfM2yU0aeF3H&gclid=Cj0KCQjw2t3VBhD8ARIsAK0F6qz3y4VuoiIii9WZ0lrfw4oWS77Wlzv7QfoBQ2ivsFFvLPeqQwPogqUaAol-EALw_wcB

If this is what you need, there are some on eBay.

thanks. thats what I needed.

 

[Sparkwizard]

thanks. thats what I needed.

Are the original ones still installed? If so, can you describe why they need to be replaced, please?

 

[Hellion]

I’m with him I want to see the photos. Bad denotes inferior quality or malformed. Maybe it was pure Chinesium and crumbled into pieces.

 

[Sparkwizard]

Valve keeper failures usually mean springs flying loose in the valve covers and valves falling into the cylinder. That is a catastrophic failure. We require pictures.

 

[Edwin Spangler]

Probably the slip on type that waller out in the center.

 

[Sparkwizard]

Maybe, but I thought those were on the old flatheads. I think the 224 has tapered split keepers and a machined retainer.

 

[Edwin Spangler]

Maybe, but I thought those were on the old flatheads. I think the 224 has tapered split keepers and a machined retainer.

I could be wrong but Im pretty sure the generators have the 224 with slip ons.

Most clone 196s have slip ons also.