212cc predator header pipe

Status
Not open for further replies.

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
Hello and Welcome....
Since your new here... Howabout you give more info on what headder exhaust you are referring to, as in a pic or a link, or both...
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Along with a performance air intake/filter, larger carb jets, and advanced ignition timing... 2-3HP???
 

KartFab

Active member
Messages
3,381
Reaction score
60
Location
Dallas, TX
weenie pipe header, not much, but you can retain a lot of the torque you would lose on a large diameter open header at low rpms.

open/multi stage header will be less restrictive at high rpms, and (combined with other modifications) will allow the engine to rev up to higher rpms not attainable with a weenie pipe or stock muffler.

So if you are just starting out, most people that do modifications, do them in stages. If you are going to get a header, you would probably also do what bob580 mentioned in order for it to make a real difference in power.
 

lance fewell

New member
Messages
7
Reaction score
0
thanks

im only 13 so idk that much about go karts. i bought a regular header pipe from gopowersports. can anybody tell me how to get more power out of the motor it is a 6.5 horsepower predator and im trying to go faster so i can race.
 

Flyinhillbilly

The great cornholio
Messages
2,468
Reaction score
132
Location
North West Arkansas
im only 13 so idk that much about go karts. i bought a regular header pipe from gopowersports. can anybody tell me how to get more power out of the motor it is a 6.5 horsepower predator and im trying to go faster so i can race.

Search man, this site is loaded with hot rod predator builds.
 

Tom Knight

Metal fabricator/welder
Messages
112
Reaction score
3
Location
Sunny Las Vegas, NV
Good to see young guys on here getting their feet wet in mechanics, welcome and let us know how you make out, some pics of your kart & what you want to do with it will help....
 

Hellion

Staff Murderator
Messages
9,443
Reaction score
4,369
I constantly reference this thread when people ask for what gains a performance header (three-stage in this case) will give them over the stock muffler. Even though it's for a flat head Briggs, it shows a wild jump in HP after it is added.

Like the author mentions, a similar dyno-tested OHV Honda/Clone build-up would be most welcome.
 
Status
Not open for further replies.
Top