1990 GSX 250 manual

Status
Not open for further replies.

tomas02

New member
Messages
76
Reaction score
0
Hi
I have a Suzuki GSX 250 1990 engine but don't have a manual or anything for it. its not wired up and will be used in my go kart

Really after a wiring diagram or something so i know whats what on this thing

If this is the wrong place to ask please point me in the right direction

Any help appreciated
 

tomas02

New member
Messages
76
Reaction score
0
have googled for a long time but cant find the 1990 wiring diagram
have only found 1992 93 and 94
also its going on a go kart ive built for my engineering project at school
is a rear swingarm suspension style
 

Rustydog2010

NZ Nutta :|
Messages
945
Reaction score
2
Location
New Zealand
have googled for a long time but cant find the 1990 wiring diagram
have only found 1992 93 and 94
also its going on a go kart ive built for my engineering project at school
is a rear swingarm suspension style

Sounds cool. I would think those 92,93 and 94 will be alright. Most manuals will span for at least 4-5 years, on older stuff. Newer stuff changes every year.

Was that one I posted, close - ish?
 

tomas02

New member
Messages
76
Reaction score
0
as im only after the wiring diagram for now im not sure if the 92 93 94 version will be the same.
have looked at loom today and figured where most things go except a starter switch haha
anyone know how to read those diagrams.

also kart is kindof off road
will post pics tomorrow when theres light (8pm here)
have looked at that link before and that is the 92,93,94 manual im talking about. will the wiring diagrams be right?
 

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
Here's the closest wiring schematic I could find, its for a 1988 to 1990 GSX R750 but it should be pretty close to your 250. (you could compare these wire colors/components to yours to see if this diagram is mostly all the same as yours)

Do you have the whole bike with all the switches, relays-etcetera, or just the engine and wiring harness only?

If you just need to know how to crank the engine over, the Suzuki starter relay will have 2 small wires:
The small black w/white wire just needs to be permanently grounded.
The small Yellow w/green wire just needs to get power from a switch to engage the relay and send power to the starter through the 2 battery cables.


Let me know if you need more help.

 

tomas02

New member
Messages
76
Reaction score
0
Thanks for that diagram should make it alot easier being coloured
I just have the engine with wiring harness no lights or extra switches
and i do just want to turn it over
the engine has a few cables coming from it one plugs into the igniter then there are two thick black cables which im quessing are grounds?
then theres the wires for the coils which are colour coded so easy
then theres a mystery six pin plug plus an extra wire that we thought were maybe temperature and oil sensors

i have nowhere for the mystery cable to go will it need to be attached to anything for the engine to go?

PS: this is the 4cyl watercooled gsxr?
 

sexyvicta

New member
Messages
806
Reaction score
2
might be a wire for kick stand so you cant start bike with the stand down. Some 250s have that. Do you have the guage cluster for it?(speedo, rev counter, neutral light etc)

so is the engine an aircooled twin or a water cooled 4?

i think gsx is the twin. gsxr is the 4. But you never know with the japanese they are pretty loose with their coding

ediedit: they def sold both those engines in the early 90s. I think they stopped making the 4 in the 90s but they still make the twin in china and sell the gsx250 in third world spec places like NZ(or the did until quite recently)
 

tomas02

New member
Messages
76
Reaction score
0
it is definitely the water cooled 4
also i dont have the guage cluster for it
interesting about that stand switch would it be closed when stand down or up?
 

sexyvicta

New member
Messages
806
Reaction score
2
um wont allow you to start bike with it down. I have no idea if your bike would of had that feature but it is possible. Some bikes also wont let you start with it in gear unless the clutch is engaged so they must have wires involved in that.

these are features i've found on a few of the sub 250cc learner style bikes
 

tomas02

New member
Messages
76
Reaction score
0
because of the age of it i doubt it had anything like that but will take a look today
will also upload some pics today of the go kart and engine
 

sexyvicta

New member
Messages
806
Reaction score
2
well i've had and riden bikes around the same age and size that had those features so yeh. Something to keep in mind anyway if you have mystery wires left over
 

sexyvicta

New member
Messages
806
Reaction score
2
http://www.gsx-r250.com/downloads.html

lots of downloads there for the gsxr250

i think thats what your engine is or atleast it is a lower spec version of the gsxr but likely much the same

the gsx250 googling i did came up with 2 cylinder engines

edit: wait they did make a 4 cyl and call it a gsx:

The GSX250F Across has a larger frame, fairing, etc, but uses the same cylinder head, engine block and engine internals as the GSX-R250, but with less aggressive camshafts, smaller carburettors, etc. A lot of things should be the same but if something looks different then be careful.
 

tomas02

New member
Messages
76
Reaction score
0
so today ive found the wires for the ignition switch wired up coils for spark plugs and find i still have alot of wires left over.
and have found a label on the radiator that says gsxr250 so guessing thats what engine is

bit of background on this engine:
I bought it second hand for this project a few months ago
before that it had been sitting in a guys shed for about 3 months
before that it was being used in a jr. dragster for about 12 months
before that it was in the bike

so im guessing alot of wires for things like headlights and indicators have been removed from the loom when it was being used in the jr dragster

So my question is what do you think would need to be connected to turn this thing over?

Thanks for all the help so far
 

tomas02

New member
Messages
76
Reaction score
0
also if anyone knows how to decipher the engine number it is:
J702 115068
 

sexyvicta

New member
Messages
806
Reaction score
2
from using google...this is what i come up with:

J= 200-249cc
7= 4cyl 4 stroke

02 = the second development of that engine. So 1990 would be about right as gsxr250 was released in '86 or something.

the rest is prob just serial number, not important etc

specs for 1990 gsxr are all over the internet. google it.

edit: to narrow down what engine you have(like what year, maybe its not a 1990) then look at the differences between the model years. Ie early engines had twin double throat carbs. Later models had 4 carbs.

edit: if you want to turn it over then jump the starter motor...
 

tomas02

New member
Messages
76
Reaction score
0
im asking all this because im very new to engines
so noob question now:
how do i jump the starter motor? lol cause theres only one wire coming from it
 

Rustydog2010

NZ Nutta :|
Messages
945
Reaction score
2
Location
New Zealand
The wire coming from it is most likely the positive, put that on the positive side of a 12v battery. There should be somewhere on the block for an earth. Run an earth from the block to the negative side of the battery. This will automatically jump the starter.

If it has been sitting for a while make sure you put some oil down the spark plug hole. Just a little bit thou.

If you can take a picture of the engine, it will help heaps.
 
Status
Not open for further replies.
Top