• OFF TOPIC fun forum - NO politics - NO religion - NO jerks. It's not complicated. Thanks!

1978 f150 flareside project

Status
Not open for further replies.

Bluethunder3320

New member
Messages
5,677
Reaction score
39
i found that sender. it doesnt appear to be leaking

so got the new water pump in, and new tranny lines. the rear line went in easy, but the front line was hitting against the y-pipe and i had to bend it a little and spent 3 hours getting that one in.

so then i put the radiator in, and it is too small? it said it was for a 400.. pretty sure i ordered the right one but this wont fit. its too narrow so it wont even bolt in.

pretty confused wondering if i ordered the wrong one or they sent me the wrong one...

http://i924.photobucket.com/albums/ad86/bluethunder3320/photo_zpsb88eafed.jpg
 

Attachments

  • photo_zpsb88eafed.jpg
    photo_zpsb88eafed.jpg
    75.2 KB · Views: 2
Last edited by a moderator:

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
i found that sender. it doesnt appear to be leaking

so got the new water pump in, and new tranny lines. the rear line went in easy, but the front line was hitting against the y-pipe and i had to bend it a little and spent 3 hours getting that one in.

so then i put the radiator in, and it is too small? it said it was for a 400.. pretty sure i ordered the right one but this wont fit. its too narrow so it wont even bolt in.

pretty confused wondering if i ordered the wrong one or they sent me the wrong one...

Odd. Did you ever decode your VIN to make sure you have a 400 and not a 351m? I'm not even sure Ford offered the 400 in the F150 that year. I can't find a standard cooling 400 radiator for a '79 on JBG...
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Odd. Did you ever decode your VIN to make sure you have a 400 and not a 351m?

nope, im going to go get that now

i checked my order and i did order a 351m rad. but if they are the same engine block i dont see why it wouldnt fit. the hoses are exactly the same, even said 351m/400. but the inlet and outlet on this radiator are too small for the hoses.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
size i need:
Core Height: 19 1/4
Core Width: 26 3/8

size i have
Core: 18" x 23 3/4" x 1 1/4"

only one they have that'll fit is plastic :(
 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
I hate plastic radiators. I guess you can see if they'll take the radiator back and try to find the proper super-cooling radiator through LMC or Dennis Carpenter.
 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
found one on lmc, $250 and its not plastic

never heard of dennis carpenter before

He can be a little pricey, but it's a great source for parts, especially NOS (new old stock). Some of what LMC sells, when you get the box, is literally Dennis Carpenter stock, in a Dennis Carpenter box, in a LMC box. Of course you get the corresponding markup

http://dennis-carpenter.com
 

crazzywolfie

New member
Messages
293
Reaction score
1
Location
Orangeville, Ontario
Interesting how the ford 302 Rad matches the requirements exactly. http://broncograveyard.com/bronco/i-20603A-302-1973-79-radiator.html
you can get that exact same rad from rockauto for $123 plus shipping. you can also save 5% off your orders if you use discount code 1283663810490443 . This discount code is good until March 24, 2013.
blue i think you should look check out rock auto. you can get some fairly good deals on some things. just have to watch the shipping and try to get everything shipped from 1 location.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
thanks i will check them out. i looked on there before at the time i was trying to rebuild that little 4 cylinder isuzu motor.

heres what it looks like now except i bolted on the water pump and got the alt. and p/s pump on. the water pump had been missing 2 or 3 bolts. i picked up some red and black engine paint and i plan on freshening it up a bit.

 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
Well, it looks like some @$$hat got rid of your PVS and decided he was smarter than Ford engineers :censored: Just a heads up, that may cause you some problems.

It's to bad you didn't save up a little more money. While you had the radiator and water pump off, it would have just been a little more work to change out your cam for a RV/towing one and your timing set for a straight-up one.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
the rad is still out, i plan on ordering the one from rock auto this weekend

are you talking about the new shiny plug in the water outlet? i put that there because the sensor was broken anyways, no vaccum lines anywhere to be found. and it hit against the fuel line

wouldnt i have to pull the engine to get to the camshafts? or can i access them through that block behind the water pump. i would have to remove that big pulley too right? how much of a job is that?

my local auto store said the cheapest rad they can get will be $500, the rock auto one is $200
 
Status
Not open for further replies.
Top