Search results

I'm looking at a ski dkl 447 and a skidoo 340 from the 80s with a trailer for 500$. What's some things to look for or I should be worried about with the snowmobiles?

The timing is spot on ? And valves feel good

Sorry if I sounded dumb there I do know how this work. How do I get the time chain cover off on the top end??

Im confused on what how to adjust the timing. Thr timing chain doesn't go up to the top of the engine.

12v 14ah or bigger in my opinion. Also if you have amazon prime order your battery from Amazon. Wayyy cheaper than buying in stores

I have the 70cc honda clone that won't start. When turning it over sometimes it will fire out the carb and it won't start? Only has 50 miles.

Sorry I was doing it wrong.. it has 0.4 resistance

1987 polaris trailboss 250 2x4

I'm getting. 85 continuity and 0 resistance

I disconnect it at the kill switch side and it doesn't get the good spark

Ya

So I got it kinda running. It will only start with some fuel pored does spark plug. Then it will start and revs crazy high and I turn off and on kill switch to keep it running. So it is running from fuel it the carb if I don't turn off and on kill switch it just revs higher and higher

Okay thanks im going to try to get it going again today. I read some thing and people say 32:1 is the best for it...? Is that right

I have good spark, I've got it to start a couple of time but pouring some gas down the spark plug. It has a brand new carb and I was using a gravity feed tank to eliminate fuel pump problem. I think I got it to run one time from the carb but it started and revved up crazy high so I killed it...

Wowww😂 I've only worked on 4 stokes. I took the engine off and apart looking for an issue and couldn't find any.... But the good thing i found is some scoring on the piston and walls. But still has 120psi.. do I need to do something about it, it feels smooth. Also the piston move side to side a...

My honda odyssey has around 120 psi compression. I put my hand over the carb and it not sucking my hand in at all........ I don't have my pull start working so I'm just using a rope. Could the pull start not being on make it so it doesn't seal or something?

Alright I'll try to know it off with a punch Knock it loose*

I'm getting 7.25mm as a measurement so I'm not sure 0.285 in Should I get a 7mm die?

Thanks for your reply.