Search results

Haha inoo havent touched it in months gonna get a new pedal first, if that dont work I would like to test the battery again as they have been left for long time without use , is there no way Of testing the battery to see how many Amps we have in the batterys would a load tester help? Or can I...

Hi Sid hope everything all good I got a new 2000w controller 100 percent compatible and still got the same problem wheel spins really slowly still scratching head thinking must be battery ? Any ideas would be great thank you tony

Bin doing some research and I got the motor from mad scooters and I'm going to show you the controller for the 2000w compared to the other 1800w controller I have? Guessing also the battery might be lagging in power I can check its voltage when the power is drawn from the battery? And prob...

Totally understandable Sid and no problem m8 speak to you soon:thumbsup: Thankyou Tony

Thankyou Sid I double checked the throttle with 5v source seems to be working 100 % I have 2 pics of it with the pedal pushed down and not Thankyou Tony

Alright Sid sorry it's bin a few days my nan passed away. I took the rotary switch off I have tested the breaker switch( see pics) I have made a new bypass for on/off switch with clamp grips I have had no change in the car ... Thankyou tony

yeah the circuit breaker works as far as I no cuts off the power and doing its job did measure the volts from one side to the next and spot on . The rotary switch is fully disconnected but still remains on the car so can't be stopping it. I sent pics it can only be 1 of them which makes me...

Yes the power switch is the same wires and turns on and off no problem ,even tho I bypass the onoff switch the motor still spinned a lil bit .but it only has connected... Hall sensor Throttle 3 phase wires forward and reverse I have seen few people that had problems and somthing is telling...

No it's fine Sid I feel your pain as you can feel mine ;) makes me laugh a bit if you could hear us both at times ...:censored:: :roflol:, mental health getting tested :surrender: But I no your doing your very best to help me and appreciate everything you have done for me and all the time...

Few more pics

More pics

I've ****ed up I have just realised I connected motor 2 instead of motor 3 my bad:mad2: I have fixed the brake switch again it has a loose clip missing on the switch so it was comming loose I have fixed that ... Sorry don't always understand what your asking of me...x I have to read it 100...

I hope I answered your question so I sent all the switch of the whole brake system Thankyou tony

No not phase wires the hall sensor for motor rotation? I have no continuity at the brake sensor when pushing it down whats so ever ... I pointed to it at the pic that's all it is .... it was working yestaday when adjusted it now its not doing nothing with my adjustments something is broken in...

Yes I plugged it in and still working with all connections. Yes the brake did beep properly after messing the the sensor switch distance , and mine is a proper hydrolic disk brake no wires underneath see pic ... Yes the motor was connected the same as the last I was expecting somthing like this...

Omg it worked tryed motor 3 can't believe it gonna do the other checks now :thumbsup: must of bin shorting the brake wire or doing somthing really thick... this is gonna work ino it , key switch always worked , and ignition , but gonna prepare the car as its up stairs and bring it down :) :)...

Sent pics of the forward and reverse switch And I tho k I did it right this time I checked the throttle with ebike tester and light got brighter the more I pushed it down feeling confident that works even tho nothing happened when pressing it down on this test Thankyou tony

Right no beeps on switch what so ever on any end or touching metal think we're good there Getting a reading off pedal think we're good there see pic The brake pedal well first of all getting a beep then I wasn't then even tho I got a beep stayed on o.o2v and new that wernt right had a look...

Throttle Brake 3 speed On/off key Indicator Forward and reverse to be fitted Thankyou tony

Yeah that would be awesome :) I get the mouse prob thursday its not the end of the world if she don't ... bin long enough :roflol:but can see the end is near:thumbsup::cheers2: Thankyoun Tony