Search results

Hello, it’s been a while since I’ve posted here, been busy on another project who’ll show later. Anyway I have an issue, my bearing on both of my karts blew out, both on the same day ironically. I need new ones but I don’t want to buy some no name Chinese brand and have them give out. I push...

Hello it’s been a while here but I just acquired a new project this weekend It’s a 1966 Ford F100 Long bed (LWB) 3 speed, manual on the column 352 V8 All original aside from the seat and mirrors, even the original wheels So it’s a bit of a project but hoping to turn it around in the next...

Does anyone have any experience painting car bodies? What primers to use and when and what brands? Not the rattle can type but the real ones

Does anyone know of another brand or alternative to the manco 5959 belt? I know gates originally used to make them but I don’t know their part number. The genuine comet ones are too expensive for us currently, we would like a cheaper one but still good quality

Hello all, On my 30 series comet the driver keeps getting jammed or something. When I slow down the engine stalls and then when I go to start it back up the kart lurches forward. And then the driver seems to disengage. The weights and case are original however I replaced the springs with new...

Aside from myself, has anyone ever rebuilt the stock somewhat cheap shocks that come on karta such as yerf dogs and Mancos? I rebuilt a set from a yerf today, and wasn’t sure if they were possibly ever oil filled? They are the original ones I think. What makes me think they possibly were oils...

My plastic tc cover has always gotten extremely hot to the touch, just wondering if this is normal, I got the whole tc setup used and have never asked on here so I figured now would be good

Hello it’s been a while, can anyone snap a picture of their axle on their manco? I have a 606 which I replaced the bent hex axle, I got a new one made that’s still a hex, but didn’t think to take a picture before dissembling it. Does anyone have a one they could post a pic of their axle

hello all, well the time has come, I bent my axle on a tree unfortunately, and it just had to be a hex axle. Its for a manco 606, 42 inch 7/8in hex if anyone has one they are willing to sell let me know and I can PM you, located outside of Austin Tx OR if anyone has suggestions for a new one...

Is the AutoLite plug you see some guys using worth it? I managed to drop my cheapo champion plug and crack it in half. Now I have the option to either get an Autolite or another “stock type” plug. 208cc clone Govoner removed High flow intake Straight shot exhaust

Ok so this is a bit different and I came up with another idea and wanted to know what you guys think. I know many people would like to have reverse, by those comet gearboxes are quite clunky and are hard to secure, especially if there is no room at the back. So what about putting a gy6...

Ok so I have basically a “straight pipe” on my 208cc clone engine, it’s about 15in and has a 45° bend in it Well it’s absolutely insanely loud which I expected, but it annoyed the neighborhood and it makes my ears sore as well. And then RLV mufflers worth it in anyone’s opinion? Other options?

Here is the kart I just finished rebuilding It’s a Manco 606 which I bought from a friend for $50 with a running ex17, Comet 30 series, and good condition tires What has been fixed: Front shocks replaced(rear ones were fine) New front tires Seat reupholstered Driver headrest reupholstered...

Switching over to a ex17 Subaru on my Yerf dog. Well there are two issues 1. The end of the cable has a barrel on the end, and throttle lever has no way to attatch a cable like that. 2. The cable only has 1 inch of available room to move backwards and forwards. (Neither picture is mine, but...

Hello this may not be worth it but I’m giving it a shot, Does anyone have an ex17 or similar motor, and is willing to remove the air box so I can see the throttle linkages?

So basically the issue this time is: Tore down an ex17, well just the crank and bearings, to replace them. So I get to put the side cover back on and can’t get the govoner gear to line up with the crank gear( I don’t know if there is a proper name) Any help would be appreciated. Can’t get...

I’ve got a buddy who is in need of a throttle cable. He has the outside part from a cable, but the actual wire part snapped in the middle. Do I got to searching in the garage and found what’s in the picture. Could we use this as a replacement and cut it to length? No clue what type of wire it...

Well after a few hours of riding with family, and using a new belt, I thought it was a good idea to take the 30 series apart, upon removing the cover I noticed the belt on the driven is sitting very low. Belt is “new” it has been sitting around for 2 years but never used till yesterday...

As the title says, is this plug saying my mixture is too rich?! It’s an .038 main jet along with open header and high flow air filter

Recently began stage one mods, and want to remove the govoner. Being the cheap person I am I really don’t want to have to pay to replace the gasket. Anyone have any tips for removing the crankcase cover and not ripping the gasket? Or any “diy” gaskets? At the least if nobody had any idea I...