Search results

You are a bit far from me

Im close to lexington ky. Mount sterling ky

Grabber green and black rims

Anyone live in kentucky on here? Looking to meet some cool people and ride together.

Here is some pics to show what i did

Here is what i came up with the control arm shock mounting bracket was. 1/2 inch off from the other side so i cut off the welds and moved brackets that evened up from left to right. As far as the height i cut the roll cage to fit a 1" square pipe then welded. Then i welded 1" pillow block if you...

Yes that has definitely been extended, my frame dont look like that but that's where im cutting mine, hope for your sake they did it right and put smaller tube inside where they welded it for added strength ---------- Post added at 09:15 PM ---------- Previous post was at 09:13 PM ----------...

All the goodies ive gotten

Thank you..been a project everything is new except the frame and still not done i ordered a bunch of goodies from GPS , this winter im tearing it down and extending the frame 6".i can see why yerf dog is out of business cheaply made karts

Not to pick apart you kart but looks identical to mine but some of your roll cage seems to be missing? Might be a slightly different style.

Figured out what im going to do. Im going to attach 2" long 1" square steel to the frame and move the mounts to the bottom of it and that will get the placement im looking for, as far as height. That way front will sit level when im in the kart

New member long time karting fan ive owned a lot of karts in my years just fix them up to my liking, get bored with them and sell them. i think im keeping my current project, its a yerf dog 30021 was a rolling frame when i got it with a bent roll cage and bent right front suspension. Ive put on...

Yes the a arms without shocks freely move i took it all apart and put grease in the holes where the bolt go. When i say stiff i mean hardly any travel in the suspension i will keep updating thread, i cut off the old mounts and putting a bar to extend where they mount

Not sure if i did that right, on my smart phone and just up load the pic from my phone

I have measured but everything is equal from all angles. Not making any since?? Need to just relocate the shocks and hope for the best if not scrap the frame and take all the new parts off everything is new but the frame.

So ideas on the best way to move the shock mounts?

Ok i understand. And there is adjustment on the shocks, i believe they are all the way out. And the front end is stiff like the shocks are not working properly im just going to cut the brackets off and move them out to where the shocks can do their job.

How would you suggest moving the mounts to where they wont move when im on the trails beating it to death?? Im afraid of something benting again if i move the shock location ---------- Post added at 08:23 PM ---------- Previous post was at 08:22 PM ---------- Im 6' and 175lbs hills and woods...

The factory ones were bent so i called yerf dog and they sent me part numbers and i got them from bmi they measured the same as what i took off?? ---------- Post added at 08:11 PM ---------- Previous post was at 08:08 PM ---------- Ive just been changing parts and the problem is still here...

Have a yerf dog 30021 and the front end is killing me on this thing has new tie rods new shocks new lower a arms and tires and the thing sits low. Any suggestions? Here is a pic where it should sit and gives you a idea how low it sits any help would be appreciated!!!