Search results

great, i'll get on it asap thanks

so.... is there any way to "de-lube" the pads without taking it apart?

wow thanks for the really quick reply! My engine is only 3.5hp and what you're describing seems like much work... I'm sure a new belt would do the trick but the hard part would be finding the same one...

well I cut off the belt and measured it. It's 33.5 inches in circumference, 1" wide and has 170 notches... where can I purchase a new one of the same specs? thanks

not possible, but I think a new belt that is the same size would do the trick b/c the current belt is very worn and torn at multiple places, making it a good bit stretched out then when it was new.

yeah, I checked out the sketch but I don't understand, should I just pry it open with a hammer (i.e. just open it by any means necessary)? Wouldn't that cause damage to it? is there no actual method of opening it? sry I'm pretty noob when it comes down to clutches...

Hey all, me again.... So i don't know why but the drive belt for my kart has gotten loose, BUT there is a bigger problem: My engine didn't exactly fit on my chassis so I had to drill holes in the right places so that the engine would align to the wheels. At first I got lucky and the holes I...

thanks for the replies.... is there a link you can direct me to that shows how to open up the clutch? or can you describe the process? thanks

Hey all, I have another prob with my kart. I lubed up the clutch a lot and now, when I turn the engine on the wheels don't spin but the engine does and it seems as tho the clutch just won't engage! What should I do? Did I permanently ruin the clutch by lubing it so much?

hey thanks for all the help.... I actually lubed all the joints and the clutch up and took it for a spin last night, it was much better but still lacks speed/power. yeah the above muffler was on it when I got it, but it was rust beyond recognition and was useless. Where can I buy a cheap...

13505515lser9127a

well there is a long number on the top of the engine but some of the digits are very hard to read. Here is what I got: 13505515LSER9127A

yeah, I can't find any model number or brand on the engine. but here are some pics...

thanks for the reply.... here are some pics of the engine and the pull start piece. I have figured out that the pull start itself is fine, but when the metal piece that comes out with a pull slips from the flywheel.

Hey, when I try pulling my pull start it will pull out but then be stuck. The only way it will recoil is if I unscrew the engine case. The coil system seems to be slipping away from the actual engine, i.e. it is not the coil itself, but its inability to stay attached to the flywheel. How can...

Hi, I just bought a used gokart with an engine. It is all very old but just about everything is there. I have been working on it for a while now and I have gotten the engine to start while the back wheels are off the ground but once someone gets in the kart and the wheels hit the ground the...