Search results

Anybody got any ideas on this?

Pic 2 Here you go.

Pic These should be better

I can see if it will let get bigger one attached

Third pic Another pic

Part two Second pic.

The original eng was a Gy6 150. This was suppose to be the same. It is a little shorter, but it think its just a short case version. The reverse kit who knows. Was part of the engine. Got it from a guy on eBay and had no paperwork. Wouldn't want to make to easy. OK I'm obviously not smart...

The original eng was a Gy6 150. This was suppose to be the same. It is a little shorter, but it think its just a short case version. The reverse kit who knows. Was part of the engine. Got it from a guy on eBay and had no paperwork. Wouldn't want to make to easy.

Bought a new engine that had a reverse kit installed and was wondering in that shared the oil with the engine or if it had its own sump to draw from?

Cranked it up and run good. Ready for some warm weather so I can get it out of the garage and take it for a spin? Got another question. Hate to be a noob but this engine has a reverse kit on it. Does it have a separate oil supply then the engine?

Cranking Sorry for disappearing on everyone. The new job had me out of town then had car after car in the garage. Worked on it yesterday and it was a ground. Ran a wire from the frame to the engine and it cranked right over. Can't thank everyone enough. Couple more little details and its...

The original eng was a GY6 Howhit. That is what I thought I was buying when I got this one. However, like I said it's a little shorter overall and a tad bit wider. Tommow I will check the ground and the connections again. I have been charging the battery so it shouldn't be a problem.

Pics

Cranking Issues Thanks for all the help. Attached are some pics of the engine and the black box. Been working late so not able to troubleshoot yet. If it weren't for work I could actually get some things done.

Cranking Issues Thanks for all the help. Attached are some pics of the engine and the black box. Been working late so not able to troubleshoot yet. If it weren't for work I could actually get some things done.

cranking I will check the wires tonight. The engine I thought was a Howhitt 150cc. However, it is not as best I can tell. Looks the same but is a little smaller length but wider width wise. Will post some pics tonight as well. Did check the connections and all seem to be tight. The...

I recently replaced the engine in my Kart. It's been sitting in my garage for the past year. I engine that I put in has a reverse kit installed. When I tried to crank it, it sounds like the battery is dead. I put jumper cables on it with my boat battery that I know should crank it no...

On the other side (see Pic) is the other attachment of that long hose. It could go several places. It looks like it is attached to a vacuum pump in the carb. There is a connection nipple on the curved piece that comes off the engine that the carb connects to and one that is off the top of the...

As requsted more photos of the carp. I was wrong take out the vent and there are two more hookups. I assume one will go to the gas tank and the other to a vacuum line somewhere. Which is which and where is the vacuum line at. All the hookups on the engine are taken. I have one picture and...

pics Thanks will post those pics tomorrow. I got the overflow. There are still three hookups on the carb.