Search results

yeah i learned that the hard way ill just make sure to do tacks before i weld it entirely and keep measuring it constantly.

so basically i will have the bars running to the front of the kart in one way shape or form. at that point i could run them to the back to just so theres a little more support. i just need something that will be built like a tank but also be relatively quick in a race.

well i mean its also an old clutch because i have a box full of extra parts and i just grabbed the one the one that looked the nicest. would it be easier to just buy a new one as apposed to using old ones all the time.

so should i do something like this but beefed up a little more so it will be a bit stronger? like add a second hoop around the the seat and some posts between some of those just so they are more stable. and be able to protect me better. also could i bow the cage out like bend it outside the edge...

it was completely straight when i cut it. my best guess is it was bent or something when i welded it on there so its probably at an angle now because i didn't check twice and measure before i put it on there

yeah ill probably be cutting the whole front end off and re welding it tacking it and measuring about 100 times before i put the final bead Down. probably checking how level it is every minute just so i don't have to worry about the left tire coming up when i try to turn right.

it would almost be easier to just buy a new chain theres a tractor shop by me and it sells the chain by the foot like 1-2 per foot and its designed for big farm equipment so putting it on my go karts I've never had problems with it. so ill probably be heading down there tomorrow because its...

i have a 62 tooth but its bent. could it be bent back? but for the cage itself i should just do like the cage over the seat? i've seen stuff like that and i just never thought it would protect as much as like a full cage. like if i roll it where would it roll onto? but as for the stability of...

well when i did i did it the first time i had it on saw horses so many putting it on a table or something would help.

right now with nothing on it as in motor or tires or anything it weighs maybe 50 pounds and I'm about 180, I'm putting 15 inch mud tires on the back and 12 inch mud tires on the front it has a 45 tooth sprocket on the axel and 10 tooth sprocket. the frame now is essentially a big motorized steer...

so if i have a 6.5 predator now what should i get for it thats more. and also you said triangles what do you mean by that ?

no i haven't noticed anything but i mean i just put a new motor on it and its always done it and its always sounded and rode the same. but i noticed today just riding around playing with it i went on a hour ride with full throttle and it smoked then to test i did the same and restricted the...

I'm thinking about making a roll cage and was wondering if anyone had some tips for me.

yes i did redo my front axel. but thats beside the point. so what most likely happened was the frame got twisted or bent when i was welding it up. so what should i do then. should i take it and cut it all off then re weld it up to try to straighten it then re weld it?

then you would need to either buy or make some mounts to attach the lights to then you can run the wires under the padding you have around the cage that will keep the tight so the don't get caught on something. but you would want two or three lights on the top and for maximum light you could put...

with the help of my level i found the bed is the the space from the level to the front axel however i could not pin point exactly where the bend is

what is the top like is it just bars or is there like a plate across the top. also what is the the back by the motor look like. is there anywhere to fit a battery.

what does the kart look like need pics

i put a little afounf the snap ring so it soaks in. but i just had no idea it needed to be oiled that often ill oil it up before the next time i ride thanks for the help

i am looking for a cheap mini bike any condition any brand. whatever I'm basically looking something on two wheels i can bolt a big motor on and go stupid fast on.