Search results

I have a motorized bike with a Tecumseh H25 on it. It's a 127CC 4 stroke flathead rated at 2.5HP from the factory. The motor was off a large push edger, and it has a diaphragm style carburetor with adjustment screws for idle and main mix. Most engines like this I have seen have a float style...

...

I have a bunch of EMT conduit I got for free. I've looked at the pre bent 90 degree bends you can buy and they are pretty smooth, like a mandrel bend. I've seen it used on cars as exhaust pipe so I know it will work for that purpose, but has anyone successfully used this stuff as a header...

These 2 motors came off Craftsman edgers. They appear to be identical in design, except one looks about a decade newer than the other. What I'm wanting to know is who made these and what model they are so I can get parts for them, like the head gasket, magneto, torque specs, etc. I'm hoping...

I've seen some of the welders that HF sells, and they look like they could get the job done. They have a 110 amp MIG that will do flux core or run sheilding gas for $199. http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=94164 How reliable are these welders ? Has anyone here...

Bringing this back from the dead. I want to run a live axle as I plan on mostly dirt and off road use, however if I want to mess around on pavement a little, I figured I could take a key out of one side. One issue that came to mind was wear. I figured a good plan would be to hone the hub for...

Anyone ever do front brakes on a cart ? I was thinking it would be somewhat straight forward using some small drum brakes that fit the dish of the rim and mounting the backing plates to the spindles somehow.

Whats something that flows good and makes power but is about as loud as a typical lawn mower ? Not wanting the full loudness of a straight pipe. I don't particularly have my own place to ride, so it would be just wherever I could find and I want to keep it as low key as possible. I was...