Recent content by rbtp

I understand I have cheaper options, but I was wondering if this is a reasonable free for what seems like a small amount of lathework.

I broke a hub that sits on a non-standard axle (1" with step down to 7/8" on each end). I can't find a replacement hub with a 7/8" bore, so I've decided to machine the axle ends down to 3/4" and then I'll have plenty of choices for off-the-shelf hubs. I was quoted $165 by a machine shop to do...

Hmmm.... If I have it to have it machined, maybe I cut a little more and convert it to one wheel drive using one of these: http://www.mfgsupply.com/gomini/gominihubs/8-10082.html It could barely turn before I tore it down. Part of that was due to back a**ward Ackerman, part low tire pressure...

Sure did, I used a dial caliper.

Not sure the pile of parts is very helpful, but you asked :) The picture of the end of the axle is probably more useful. It already is a 1in axle so if I can't identify a supplier for this hub, I may have the axle machined.

I have an unknown brand rusted-out live-axle franken-kart that I'm trying to make road worthy for my son. Yesterday we tried to strip the axle of all its bits. The toughest bit was one of the wheel hubs. In the process of removal, it was destroyed beyond repair (overzealous use of a gear...

I take it that typical golf carts are governed at 15-18mph. Can the speed controllers be messed with to increase the top speed? I suppose they may be geared to operate at max rpm, so overvolting may be the answer. Anyway, I hear about golf carts being modified to pull wheelies, so a golf cart...

Like so many others I'm exploring whether my first go-kart build should involve a conversion to electric. There have been many recommendations to use a golf cart motor. I found a couple craigslist ads for old carts for a couple hundred dollars which seems like a pretty good deal for a motor and...

I'm looking for a place to ride the go kart in CA. I'm in Orange County. I found El Mirage dry lake bed within a couple hours drive. Does anyone know if karts are allowed in this ohv area. Any other suggestions near the OC?

Will I be able to find parts if needed?

one more try

pics test 2

Pics -testing

Hi All- This seems like a great site, was happy to come across it! My son's 12th birthday is coming up and a boy needs a go-kart! Bought this last night in the dark. More warts in the daylight than I thought. Lots horrible welding done to the frame, but the Honda 5.0 started and ran. Torque...