Recent content by npragin

  1. N

    Could I use this wheel?

    This is the frame I am using, I can not find the front wheel clearance written there, and I assume that my backwheel clearance is based on the axle that I select. So would the wheel I linked at the top of the thread fit in this frame...
  2. N

    Could I use this wheel?

    Not yet. We thought we would get the parts first and then the frame because we figured that it would be easier to find a frame that could fit for us rather than all the other things to fit the frame. Should I pick out the frame first?
  3. N

    Could I use this wheel?

    Would the front wheels change anything for steering? I am thinking of using these wheels for my front and am wondering if they will obstruct the steering or are not ideal for front wheels. If you have any reccomendations please tell me them. Would the front wheel also need to be floaters? The...
  4. N

    Could I use this wheel?

    I am wondering if I could use this wheel as a back wheel that is not driven, even if it is not the one being driven. It will be a one wheel drive kart, and I want to use this wheel to attach to the dead axle. If this will not work for a back wheel due to the double flange, what wheel would be a...
  5. N

    How to make single wheel drive?

    It is a dead axle, could you reccomend a wheel with the same specs?
  6. N

    How to make single wheel drive?

    Thank you very much for the video link, I hadn't seen that one, but the main problem is that I can't find a sprocket that would fit. ---------- Post added at 02:37 PM ---------- Previous post was at 02:36 PM ---------- The OD of the tire is 12 inches.
  7. N

    How to make single wheel drive?

    What type of sprocket could I use? I want to keep it 60T but the chain number can change, could you suggest a sprocket?
  8. N

    How to make single wheel drive?

    I know how it all works, but I am not sure how to mount my 60T sprocket, http://www.gopowersports.com/manco-drive-sprocket-60t-35/ onto my wheel, https://www.summitracing.com/parts/dtg-706-08b What parts do I need to buy to be able to mount the sprocket on this wheel, if even possible. If...
  9. N

    One Wheel Drive Question

    If one wheel is constantly the one being powered, won't it constantly be turning to that side by a little bit? Even if not a lot, it still will. I am curious if that is right, and if it does not constantly turn, why. Also on the Live Axle vs Single Wheel Drive entry in the guide on the website...
  10. N

    Low Top Speed

    Does anybody know why I would not be able to reach the 45 miles per hour? I’m not expecting too I’m just curious. Is it because of a low torque or horsepower of the engine?
  11. N

    Low Top Speed

    Why would I not be able to reach that speed? Would it be possible with a higher horsepower engine? Or is it limited due to a different factor. ---------- Post added at 03:02 PM ---------- Previous post was at 02:45 PM ---------- Also, I am going to be running a one-wheel drive system, but I am...
  12. N

    Low Top Speed

    I am not sure if I will get stiffer springs and reinforce the engine or not, but if I were to, what parts would I need to get? Is there a video or article outlining all of the steps and parts I need?
  13. N

    Low Top Speed

    So just to be clear if I do remove the governor and bring up the ignition time, I would definitely need stiffer valve springs? Or are you saying if I get stiffer valve springs as well as do the other two things I should get the billet.
  14. N

    Low Top Speed

    Would 28 be ok for the ignition timing or is that to high?
  15. N

    Low Top Speed

    Final question, are my tire dimensions ok? I am going to upgrade the overall diameter to 12" like you said, but are the widths alright? My width for my front is 5 inches, and for my back is 8 inches. Is that alright or should I make some changes. ---------- Post added at 12:02 PM ----------...
Top