Could I use this wheel?

Status
Not open for further replies.

npragin

New member
Messages
19
Reaction score
0
I am wondering if I could use this wheel as a back wheel that is not driven, even if it is not the one being driven. It will be a one wheel drive kart, and I want to use this wheel to attach to the dead axle. If this will not work for a back wheel due to the double flange, what wheel would be a good replacement? I don't think the double flange would obstruct anything but I am just curious if it would work as my driven and driving wheel. Thank you.

http://www.gopowersports.com/5-drive-wheel-assembly/
 

npragin

New member
Messages
19
Reaction score
0
Would the front wheels change anything for steering? I am thinking of using these wheels for my front and am wondering if they will obstruct the steering or are not ideal for front wheels. If you have any reccomendations please tell me them.

Would the front wheel also need to be floaters?

The wheel I am trying to use for the front is the DWT 706-04 wheel. Thank you.
 

speedbug78

New member
Messages
55
Reaction score
0
Location
Waldport, OR
It looks to me like you could use 3 of the floater wheels and 1 of the flanged wheel to build a single wheel drive kart. If these are going on an existing chassis you will want to measure your axle size, axle length, tire clearance fully turned both ways and your ground clearance before determining if those wheel and tires will fit. Do you have a picture of what you're planning to put them on?
 

npragin

New member
Messages
19
Reaction score
0
It looks to me like you could use 3 of the floater wheels and 1 of the flanged wheel to build a single wheel drive kart. If these are going on an existing chassis you will want to measure your axle size, axle length, tire clearance fully turned both ways and your ground clearance before determining if those wheel and tires will fit. Do you have a picture of what you're planning to put them on?

Not yet. We thought we would get the parts first and then the frame because we figured that it would be easier to find a frame that could fit for us rather than all the other things to fit the frame. Should I pick out the frame first?
 

npragin

New member
Messages
19
Reaction score
0
This is the frame I am using, I can not find the front wheel clearance written there, and I assume that my backwheel clearance is based on the axle that I select. So would the wheel I linked at the top of the thread fit in this frame?

http://www.bmikarts.com/Go-Kart-Fra...rcQ-tku--WDzR5-lg20BbPhoek_V8MoRoClrgQAvD_BwE

---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------

Also, if anybody cares to reccomend a good frame I would really appreciate that as I am pretty new at this and don't really know what to look for in a frame.
 
Status
Not open for further replies.
Top