How to make single wheel drive?

Status
Not open for further replies.

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
You wouldn't typically mount that sprocket to that wheel, but to a hub on the axle, in which it was mounted..

Equally speaking, what's the kart ect?
 

npragin

New member
Messages
19
Reaction score
0
What type of sprocket could I use? I want to keep it 60T but the chain number can change, could you suggest a sprocket?
 

npragin

New member
Messages
19
Reaction score
0
man, if only someone made a video about that?

https://youtu.be/0rO9H0KggsY?t=1m33s

Thank you very much for the video link, I hadn't seen that one, but the main problem is that I can't find a sprocket that would fit.

---------- Post added at 02:37 PM ---------- Previous post was at 02:36 PM ----------

Whats the OD of the tire?.... Thats a kart rim, so the tires are going to be smallish.. meaning there wont be much if any ground clearance...

The OD of the tire is 12 inches.
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
You need a hub for the sprocket... That also attaches to the wheel...

But more importantly... Is this for a live or dead axles kart?...

Cause these wheels aren't really for dead axle types... There isn't much room for a hub, bearings, bolts and then a register for a sprocket...
 

npragin

New member
Messages
19
Reaction score
0
You need a hub for the sprocket... That also attaches to the wheel...

But more importantly... Is this for a live or dead axles kart?...

Cause these wheels aren't really for dead axle types... There isn't much room for a hub, bearings, bolts and then a register for a sprocket...

It is a dead axle, could you reccomend a wheel with the same specs?
 
Status
Not open for further replies.
Top