Recent content by jasonH

I will give those a try. I have tried the PB blaster before I posted. No luck. It should just pull off right? It wouldn't be screwed onto the shaft. Inside the TC shaft towards the engine is a 5/8" thread that a long bolt goes into once it's all put together. But I have no idea what the bigger...

Youtube is your friend. Search for predator 212cc throttle linkage and there are many how to's for this engine. I don't know a thing about your kart but the pred 212 is very popular. This forum was very helpful for me as well when I started my new hobby. Good Luck

I have this older go kart that I am pulling parts off and rebuilding. I have successfully rebuilt the other end of this TC but can't seem to get the rest of the engine shaft mounted portion off. I got the outside off with a puller but cant seem to get the inner part off. I cant see anything that...

Yeah. The boys really like it. I still have the hand brake, floor, kill switch ,and the roll bar to do. Thanks for all your help.

will do. The threads on the heim joints are 2" long and are both adjusted all the way in currently. I am assuming I'm after a 10° positive camber?

The top a arms are 1" longer than the bottom. The heim joints are welded straight. They were made in a jig on a flat table. I think it's just the picture that makes them look bent. Steering is night and day. I have a video up over on my build thread. There is still some bump steer when it's...

There is about a 1/2" drop on the shocks. The shocks have a 2" travel. This gave me about 1-1/2" rise. When i put my 200lb frame in it that changes to roughly 1" down travel and 1" up. As far as the heims go I don't think I follow you. The tube you see welded to the a arm is threaded on the...

I'll look into that. Thanks.

is that the bag looking filter that goes over the filter?

Thanks for the heads up on the privacy setting. Should be public now.

Mostly complete So It's been awhile, mostly due to me building backwards. I had some issues with the entire front end set up. I think I am on the right track now. Here is the thread to my front end problems http://www.diygokarts.com/vb/showthread.php?t=28866 I had an issue come up during some...

Problems Mostly solved After taking in everyones advice I have rebuilt the front end. I do have bushings that go into the pivots for the A Arms but had a question for you guys. I bought brass bushing and was concerned about the soft metal getting destroyed in there. Should I return those and...

Thanks, Will do

Does this make sense?

Predator 212cc Modded backfire The billet flywheel came today. The predator had its first start up. After I let it idle for a bit I gave it a little throttle to hear it roar. Backfire. Here's a short video of what I am dealing with. Watch "Predator 212cc Modded" on YouTube Predator 212cc...