where to find sprocket?

[acg23]

i needa 60 tooth steel sprocket 1.5 id bore with no mounting holes for #35 chain. i would appreciate any replies to where i can get one of these. thanks.

 

[Blazkowiez]

I'm not sure where you can find something with no mounting holes period but if you don't mind some holes any Oregon dealer should be able to order you one with as little as 4 holes.

 

[brendonv]

Ebay!!!!! I doubt u will find one with no mounting holes but just drill more. Take ur time marking it out and ur sweet.

 

[Russ2251]

Fairly common:
http://www.gokartgalaxy.com/sprocket_blanks.htm

 

[anderkart]

i needa 60 tooth steel sprocket 1.5 id bore with no mounting holes for #35 chain. i would appreciate any replies to where i can get one of these. thanks.

Did your old sprockets mounting hole have splines to match a splined axle by any chance?

 

[Doc Sprocket]

If you live in Canada, Pricess Auto has one that's close- 60T, #35, 1 5/8 bore, p/n# 3844065, $15.49 CAD.

 

[acg23]

Fairly common:
http://www.gokartgalaxy.com/sprocket_blanks.htm

i need a steel one. but thanks for the reply.

 

[acg23]

Did your old sprockets mounting hole have splines to match a splined axle by any chance?

I am not replacing an old one. i am just going to weld it to my hub.

 

[r_chez_08]

Why would you want to weld it to your hub? And why would it matter if it has holes?

 

[309antonios]

If you are still looking, tractor supply company has them. They are meant for welding on to your choice of hub.

www.tractorsupplyco.com

 

[acg23]

thanks for the find but i have changed my mind. i will just bolt one on.

 

[solomon]

I got a 60T 4 bolt sprocket on ebay for $19 shipped, but Polaris a local retialer could get me one for as low as $14.75. So check retail stores before ordering online. Good Luck!

 

[acg23]

thanks for the tip. will #35 chain hold up on a 5hp minibike? it has some weight to it.

 

[solomon]

It should hold up fine

 

[acg23]

yea/ thats what i figured. you think a 60 tooth sprocket and 12 tooth clutch would work?

 

[solomon]

Yea 5:1 Gear ratio, it should be fine on a mini bike, What size tire you using?

 

[acg23]

i was hoping to get a 15 inch donut but the 16.5 are more common. would the 16.5 be too big for the clutch?

 

[solomon]

If you want a 5:1 Gear Ratio I think you should get a smaller tire like 14" or 15" or smaller in height.