Possom Point
Active member
more problems. The sprocket is moving on the axle even with a 1/4” key and the hub with a locking screw. It carved a deep cut into the side cover. I’ve been fighting with this the past few hours using blue loctite on the screw and re-aligning the chain. Test riding and coming back to see the groove kept getting deeper, and then it moved to the other side hitting the driven. I bought locking collars, loctited those and it still moved. Any ideas?
also here are a couple pics of the torque converter plate With the spacers.
also here are a couple pics of the torque converter plate With the spacers.