Help with modifications

Status
Not open for further replies.

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Hey guys, need some help making sure I get the right parts. I have a Baja warrior and ordered an air filter for it awhile go. http://www.shop.hotrodminibike.com/Air-Filter-Pleaded-25-Angled-KNF.htm

Didn't realize I needed more parts to make it work. :eek:

Is this all I will need?

http://www.shop.hotrodminibike.com/Billet-Air-Filter-Adapter-6931.htm

http://www.shop.hotrodminibike.com/Choke-Retainer-VK347.htm

The person at the company I emailed said I would also need this.

http://www.shop.hotrodminibike.com/Re-Jet-Kit-for-Stock-65hp-Predator-Carb-DJ-1245-1251.htm is that necessary?

I've never done anything to it except add a TC and straight pipe (which I'm going to have to order this http://www.shop.hotrodminibike.com/Bullet-Muffler-BM34.htm because the neighbors are getting a little upset at the noise lol)

Sorry if these were obvious questions, I just want to make sure I get all the stuff I need in one shipment

Thanks everyone!
 

Keystone Motorsports

But who was phone?
Messages
82
Reaction score
1
Location
Lebanon, PA
The filter mounts to it. Once you remove the airbox there is no flange for the filter.

The jet is easy. You will need to modify a screwdriver to remove the old jet.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

Hellion

Staff Murderator
Messages
9,440
Reaction score
4,364
I hate it when a seller doesn't list the dimensions and/or the center-hole to center-hole spacing of something like an air filter adapter. :mad:

Shop around if you like. Tons of vendors offering the exact same thing around the interwebz.
 

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
The filter mounts to it. Once you remove the airbox there is no flange for the filter.

The jet is easy. You will need to modify a screwdriver to remove the old jet.

Sent from my SAMSUNG-SM-G930A using Tapatalk

I just watched a few videos and it doesn't look too hard :D I will be able to do it for sure! Thanks for the help

I hate it when a seller doesn't list the dimensions and/or the center-hole to center-hole spacing of something like an air filter adapter. :mad:

Shop around if you like. Tons of vendors offering the exact same thing around the interwebz.

Yeah that is a pain. I think the reason is because he has them all listed under Baja warrior, but still would be nice to know for sure!

What are some places you recommend looking? I can't seem to find them anywhere.

Also, the "re jet" kit from there seems too expensive. What is the longer item that comes with the set?

---------- Post added at 08:02 PM ---------- Previous post was at 07:59 PM ----------

By the "longer thing" I mean the emulsion tube. Sorry didn't see what it was called
 

Keystone Motorsports

But who was phone?
Messages
82
Reaction score
1
Location
Lebanon, PA
The emulsion tube is probably a larger diameter than stock.

I used an adjustable needle, can't find them anymore though.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
If you want another e tube... Try going to a lawnmower or tool rental shop... They'll all have a junk drawer full of stuff... For those bits they might just give it to you...

I got a bunch of jets and a E tube for $5, cause that's all I had...
 

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Thanks for the suggestions guys! I'm still not exactly sure where the emulsion tube goes and what it does.

@Mckutzy, I don't really want another tube (I don't know what it does) but the air filter upgrade apparently needs a different jet. Will any .035 jet work as long as it's for a 212 engine?
 

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Ok that makes sense. So I would have to unscrew the jet and with some fiddling it will fall out? Then I can just slide the new e tube in?
 

Joe-405

Enjoying New Projects
Messages
2,673
Reaction score
98
Location
U.S.A.
You have to have a larger idle jet also. Nobody has said anything about one yet. You will run lean and will be buying another engine without it.
 
Status
Not open for further replies.
Top