SpiderSpartan
New member
I picked up a Kohler CH12.5S-1920 engine on the cheap. It starts and runs great, but the rectifier is not outputting any usable voltage.
I checked the stator output and it's showing about 45V AC at full throttle without anything connected. I bought a new rectifier and one of the diodes appears to have blown. It's actually putting out -3V DC somehow.
My question is, is there something wrong with my stator that is blowing the rectifier, or did I just get a dud rectifier?
I checked the stator output and it's showing about 45V AC at full throttle without anything connected. I bought a new rectifier and one of the diodes appears to have blown. It's actually putting out -3V DC somehow.
My question is, is there something wrong with my stator that is blowing the rectifier, or did I just get a dud rectifier?
Sure enough, once I hooked up the battery to the B+ regulator/rectifier output it started outputting 14V. Live and learn I guess. Thanks for helping me work through this.