Opinions please

Status
Not open for further replies.
landuse

landuse

Moderator
Staff member
Messages
18,796
Reaction score
593
Location
Pietermaritzburg, South Africa
Personally, I think it is going to be a lot cheaper for you (if that is what you are going for) if you get a frame off Craigslist and build it up from there. Things can get pretty expensive when building from scratch.

The Powerland engine that you have linked has been bought by about 4 of the members here on the site already. They look like they should be fine. You can see the engine Joe bought, as well as the internals, here

http://www.diygokarts.com/vb/showthread.php?t=32896&page=4
 
J

Joel

New member
Messages
50
Reaction score
0
Location
Mcalisterville,pa
chancer said:
My opinion: If that is what you want...
http://www.diygokarts.com/vb/showthread.php?t=33238

This is ^ cheaper. Now I hate that, cause it is not DIY, but trust me that is a lot harder to build than you think,
Click to expand...

Hey thanks I kinda agree with you that it would be hard. :iagree: about it not being diy. Because diy is way to go!!!

---------- Post added at 06:50 AM ---------- Previous post was at 06:48 AM ----------
landuse said:
Personally, I think it is going to be a lot cheaper for you (if that is what you are going for) if you get a frame off Craigslist and build it up from there. Things can get pretty expensive when building from scratch.

The Powerland engine that you have linked has been bought by about 4 of the members here on the site already. They look like they should be fine. You can see the engine Joe bought, as well as the internals, here

http://www.diygokarts.com/vb/showthread.php?t=32896&page=4
Click to expand...

Hey I really appreciate your wise words. Cuz I don't have tons of money to sink in to a kart. I think im going to check into that engine some more cuz that I can afford!!:thumbsup:

---------- Post added at 06:52 AM ---------- Previous post was at 06:50 AM ----------

Thanx for all your help guys!!!!:auto:
 
drummingpariah

drummingpariah

New member
Messages
33
Reaction score
0
Location
New Hampshire
I have a reasonable amount of fabrication experience, but all the time that would go into fitment, prep, and welding on a chassis just doesn't make sense, when there are so many good used options. You'll be hard-pressed to design something better than most of the 'standard' chassis.

A kart chassis is a fantastic project, if your primary goal is to fabricate something. If your primary goal is to drive a kart, just pick up something used, and save time/money.
 
T

tazmannusa

New member
Messages
213
Reaction score
0
Location
Yettem, California
The Trax II is a fun little kart, bit rough without suspension . Not to hard to build if you have a little fab skills or willing to learn. Cost wise to many variables but I would say on cheap side about 1k with nothing fancy and a lot of scrounging. This one has 6.5 with tav2 and it does ok
 

Attachments

  • 007.jpg
    007.jpg
    314.3 KB · Views: 7
  • 008.jpg
    008.jpg
    241.5 KB · Views: 7
J

Joel

New member
Messages
50
Reaction score
0
Location
Mcalisterville,pa
tazmannusa said:
The Trax II is a fun little kart, bit rough without suspension . Not to hard to build if you have a little fab skills or willing to learn. Cost wise to many variables but I would say on cheap side about 1k with nothing fancy and a lot of scrounging. This one has 6.5 with tav2 and it does ok
Click to expand...

ok 1k is more than I wanna spend.. If I did do it I was thinkin of a 13 hp with a torque converter but that would bring the cost up too.. so I guess I start lookoing around..:thumbsup: problem is that karting isn't a big thing around here.. you guys should move to Pennsylvania!!!!! Haha:lolgoku:
 
T

tazmannusa

New member
Messages
213
Reaction score
0
Location
Yettem, California
Joel said:
ok 1k is more than I wanna spend.. If I did do it I was thinkin of a 13 hp with a torque converter but that would bring the cost up too.. so I guess I start lookoing around..:thumbsup: problem is that karting isn't a big thing around here.. you guys should move to Pennsylvania!!!!! Haha:lolgoku:
Click to expand...

Yep that is a problem, nothing is cheap any more when buying new parts and it's all the little stuff that adds up. On this one I ran the Honda GX390 with the 40 series CVT for a while, went like heck but would beat the heck out of me and at the time it had 17" tall super turf tires . It's a lot better now with 20" knobby tires and lighter engine but it's lacking power on hills
 
J

Joel

New member
Messages
50
Reaction score
0
Location
Mcalisterville,pa
tazmannusa said:
Yep that is a problem, nothing is cheap any more when buying new parts and it's all the little stuff that adds up. On this one I ran the Honda GX390 with the 40 series CVT for a while, went like heck but would beat the heck out of me and at the time it had 17" tall super turf tires . It's a lot better now with 20" knobby tires and lighter engine but it's lacking power on hills
Click to expand...

yea I garuntee it!!! the piece of junk kart I have now is shot because of beating the crap out of it. So that is why I was checking around.

---------- Post added at 03:55 PM ---------- Previous post was at 03:51 PM ----------

You guys say check on craiglist and I agree with you.. I like them they do have good stuff.. But I don't know if yous ever heard of Letgo. If you didn't check it out for karts. THey have Loads of them!! But all far from me:mad::mad: Just thot id bring that out...
 
Hellion

Hellion

Murderator
Messages
9,190
Reaction score
4,162
You gotta look in the *surrounding areas* while on Craigslist. I checked the Lancaster area on your behalf and saw plenty of karts in various types and conditions. You have to be patient sometimes and check for several weeks or more to see new ads...
 
chancer

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
93
Location
COMFORT, TEXAS
Somebody else on here is from Pa. He has been here recently...
I just cannot remember who?
 
Hellion

Hellion

Murderator
Messages
9,190
Reaction score
4,162
By all means, show us links to individual karts. That's an excellent idea; to bounce potential buys off the forum (get opinions) before you pull the trigger.

That Murray kart looks decent for $250. Honest description of its flaws--just needs a carb cleaning and some welding done.
 
Last edited:
J

Joel

New member
Messages
50
Reaction score
0
Location
Mcalisterville,pa
Hey if your tired of me posting just say but lookie here!! 10 min from here!!!!:smiley_omg: I will buy if dad says yes.. What price shall I offer???http://harrisburg.craigslist.org/snw/5617299766.html

---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
Hellion said:
I thought you were trying to show us links to individual karts. If so, that's an excellent idea; to bounce potential buys off the forum (get opinions) before you pull the trigger.
Click to expand...

Sorry!!:mad: I see your point tho!! Man I thot that first would be a go but now im not sure?? this one is closer.. the other one is about 45 min
 
Hellion

Hellion

Murderator
Messages
9,190
Reaction score
4,162
I edited my post because I thought none of your links worked. The Letgo link just takes me to my state, not yours, and shows no kart. The CL link works though.

I figure any kart, running or not that has wheels, seat and steering wheel is at least $100. But don't offer without seeing it in person first... but I dunno... $200-250?

---------- Post added at 11:10 PM ---------- Previous post was at 11:08 PM ----------

Always look for other defects that the owner failed to list. Like if the bearings are all seized and it barely rolls. Go from there with your lowball offer.
 
chancer

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
93
Location
COMFORT, TEXAS
No not at all Keep posting. Its all good.:thumbsup: Sometimes people post links and they do not work.
If I did not want you to post I would tell you straight out.
 
Status
Not open for further replies.
Top